Wetend Kit: DB22P-W-FF-3, 12/25 hp Sized for Horsepower, Polypropylene, 2 in Flange
In Stock
$4,460.00
Save 13%
$3,897.71
/each
Earn 3897 points for this item
($38.97 for your next purchase!)
REGISTER NOW TO EARN!
Request quantity discount pricing
You're Viewing
FINISH THOMPSON Wetend Kit: DB22P-W-FF-3, 12/25 hp Sized for...
Mfr # DB22P-W-FF-3
$3,897.71
Customers Also Viewed
No related products found.
Product Details
| Brand | FINISH THOMPSON |
| Discharge Diameter | 2 in |
| Pump Housing Material | Polypropylene |
| Media Temperature - Maximum | 180 Degrees F |
| Shaft Seal Material | FKM |
| Impeller Material | Polypropylene |
| Inlet Diameter | 2 in |
| Product Type | Wetend Kit |
| Is this a Hazardous Material Product? | N |
| Contains California Prop 65 Reproductive Toxicant | N |
| Best Efficiency Head | 135 ft |
| Shaft Outside Diameter | 3/4 in |
| Pump Shaft Rotation Direction | CW |
| Best Efficiency Flow | 145 gpm |
| Contains California Prop 65 Carcinogen | N |
| Discharge Standard | NPT |
| Max Specific Gravity | 1.8 |
| Inlet | 2 in Flange |
| Safety Data Sheet (SDS) Applicable? | N |
| Display Sell UOM | EA |
| Freight Class Code | 260 |
| Discharge | 2 in NPT |
| For Manufacturer Part Number | DB22P-FF-3-21-M239 |
| Storage Protection Code | A |
| Standards | EN ISO 12100, CE, EN 809 |
| Discharge Gender | Male |
| Overall Width | 18.15 in |
| Overall Height | 18.12 in |
| Sized for Horsepower | 12/25 hp |
| Shaft Material | Ceramic |
| Flow Rate (Maximum) | 61 gpm |
| Overall Length | 24.71 in |
| Impeller Design | Closed |
| Max Ambient Temperature | 180 Degrees F |
| Should Sales be Restricted by Region? | N |
| Motor Efficiency Class | Standard Efficient |
| Pump Drive Configuration | Close-Coupled |
| Inlet Standard | Flange |
| Product Powered by Fossil Fuel | N |
| Feet of Head (Maximum) | 155 ft |
| Viscosity (Maximum) | 150 cps |
| Min Flow | 0.5 gpm |
| NEMA Nominal Efficiency | 0.0 |
| Motor Speed (Maximum) | 3,450 RPM |
| Pumping Application | Liquid Transfer, Chemical Transfer |
| Compatible with Pump Type | Chemical Transfer Magnetic Drive Pump |
| Discharge Rotation Increments | 0 Degrees |
| Motor Efficiency Compliance Certification Number | 000000 |
| NPSHr | 13 ft of head |
| Manufacturer Part Number | DB22P-W-FF-3 |
| Ozone Depleting Substance | N |
| Manufacturers Warranty Length | 5 yr |
| Hazmat_Message | Compliance_Hazmat_ExcGeneral |
| Priming | Manual |
| Volute Material | Polypropylene |
| California Biodegradable Labeling Compliance | N |
| Compatible with Brand | Finish Thompson |
| Shutoff Pressure | 67.1 psi |
| Inlet Gender | Female |
| Shaft Seal Type | Sealless |
| Solid Diameter (Maximum) | 0.016 in |
| Display Qty | 1 |
| Compatible Grainger Part Number | 420WL2 |
| Max Suction Lift | 0 ft |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Chemical Compatibility | Water, Acetic Acid 80%, Calcium Chloride, Hydrochloric/Muriatic Acid 20%, Citric Acid 50%, Fertilizer, Hydrochloric/Muriatic Acid 37%, Sodium Bisulfate, Sulfuric Acid 10% to 70%, Phosphoric Acid 40%, Ethylene Glycol, Sodium Hydroxide/Caustic Soda 50%, Sodium Bisulfite, Deionized Water, Sulfuric Acid 10%, Potassium Hydroxide 50%, Hydrochloric/Muriatic Acid 100%, Sodium Bicarbonate 10%, Antifreeze, Ammonium Hydroxide, Herbicide, Saltwater, Fungicide, Acetic Acid 20%, Sodium Hydroxide/Caustic Soda 80%, Sodium Hydroxide/Caustic Soda 20% |
| Impeller Diameter | 6.5 in |
| Motor Efficiency Regulation Applicable | Y |
| Mfr. Model # | DB22P-W-FF-3 |
Description
Wetend Kit