Wetend Kit: DB11V-W-T-FF, 12/25 hp Sized for Horsepower, PVDF, PVFD, 2 in Flange
In Stock
$3,759.00
Save 13%
$3,284.43
/each
Earn 3284 points for this item
($32.84 for your next purchase!)
REGISTER NOW TO EARN!
Request quantity discount pricing
You're Viewing
FINISH THOMPSON Wetend Kit: DB11V-W-T-FF, 12/25 hp Sized for...
Mfr # DB11V-W-T-FF
$3,284.43
Customers Also Viewed
No related products found.
Product Details
| Brand | FINISH THOMPSON |
| Standards | EN ISO 12100, CE, EN 809 |
| Shutoff Pressure | 30.7 psi |
| Inlet Standard | Flange |
| For Manufacturer Part Number | DB11V-T-FF-M215 |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Compatible Grainger Part Number | 420WL5 |
| Impeller Design | Closed |
| Product Powered by Fossil Fuel | N |
| Contains California Prop 65 Reproductive Toxicant | N |
| Shaft Material | Ceramic |
| Compatible with Pump Type | Chemical Transfer Magnetic Drive Pump |
| Media Temperature - Maximum | 220 Degrees F |
| Min Flow | 0.5 gpm |
| Pump Drive Configuration | Close-Coupled |
| Impeller Material | PVFD |
| Is this a Hazardous Material Product? | N |
| Display Sell UOM | EA |
| Feet of Head (Maximum) | 71 ft |
| Discharge Rotation Increments | 0 Degrees |
| Pump Housing Material | PVDF |
| Discharge Diameter | 1-1/2 in |
| Volute Material | PVDF |
| Motor Efficiency Regulation Applicable | Y |
| Max Ambient Temperature | 220 Degrees F |
| Sized for Horsepower | 12/25 hp |
| NEMA Nominal Efficiency | 0.0 |
| Should Sales be Restricted by Region? | N |
| Discharge Standard | NPT |
| Freight Class Code | 260 |
| Motor Efficiency Compliance Certification Number | 000000 |
| Pump Shaft Rotation Direction | CW |
| Best Efficiency Head | 60 ft |
| Manufacturers Warranty Length | 5 yr |
| Display Qty | 1 |
| Shaft Outside Diameter | 1/2 in |
| Storage Protection Code | A |
| Solid Diameter (Maximum) | 0.016 in |
| Contains California Prop 65 Carcinogen | N |
| Discharge | 1-1/2 in NPT |
| Hazmat_Message | Compliance_Hazmat_ExcGeneral |
| Flow Rate (Maximum) | 42 gpm |
| Max Suction Lift | 0 ft |
| Priming | Manual |
| Inlet Diameter | 2 in |
| Product Type | Wetend Kit |
| Safety Data Sheet (SDS) Applicable? | N |
| Inlet | 2 in Flange |
| Motor Speed (Maximum) | 3,450 RPM |
| Overall Width | 13.59 in |
| California Biodegradable Labeling Compliance | N |
| Compatible with Brand | Finish Thompson |
| Manufacturer Part Number | DB11V-W-T-FF |
| Chemical Compatibility | Acetic Acid 80%, Water, Calcium Chloride, Citric Acid 50%, Hydrogen Peroxide 1% to 50%, Fertilizer, Nitric Acid 70%, Sodium Bisulfate, Phosphoric Acid 40%, Ethylene Glycol, Sodium Bisulfite, Sodium Hypochlorite 12.5%, Deionized Water, Sulfiric Acid 1% to 98%, Sodium Bicarbonate 10%, Chromic Acid 10%, Antifreeze, Ammonium Hydroxide, Herbicide, Fungicide, Saltwater, Acetic Acid 20%, Transmission Fluid |
| Best Efficiency Flow | 78 gpm |
| Overall Height | 13.93 in |
| Discharge Gender | Male |
| Shaft Seal Type | Sealless |
| Shaft Seal Material | FKM |
| Inlet Gender | Female |
| Pumping Application | Liquid Transfer, Chemical Transfer |
| Max Specific Gravity | 1.8 |
| Ozone Depleting Substance | N |
| Overall Length | 19.06 in |
| Impeller Diameter | 4.63 in |
| Motor Efficiency Class | Standard Efficient |
| Viscosity (Maximum) | 150 cps |
| NPSHr | 10 ft of head |
| Mfr. Model # | DB11V-W-T-FF |
Description
Wetend Kit