Morse® Verti-Karrier Below-Hook 55 Gallon Drum Lifter Model 90 - 1000 Lb. Capacity

Description

Morse® verti-karrier below-hook 55 gallon drum lifter - 1000 lbs. Capacity

Use verti-karrier drum lifter hoist attachments to grab and lift your 55 gallon steel drum by gripping under the top rim. Then move and place your drum almost anywhere.

Load a drum to and from remote or hard-to-reach areas ol attach the verti-karrier drum grab to your hoist or crane

Move drum picker and lower onto the top of drum

As the drum grab is elevated it grips drum automatically under the top rim

When the drum is lowered to the ground the drum grab carriage drops down and automatically locks in the open position releasing the load

The verti-karrier drum grab is then ready to lift another drum /olthe drum picker grip will not disconnect until drum is fully down. You only need to operate your hoist to guide drum grab into position. This saves operator time and protects against dangerous climbing.

Capacity lift a drum weighing up to 1000 lb. (454 kg). Drum lifter is sized for your 55 gallon (208 liter) steel drum. It has 3 different settings and should be adjusted to grip the sidewall under the rim of your drum.

Set in the top hole it will grip to 22-1/16" (56 cm) diameter drum

Middle hole to 22-3/16" (56.4 cm) diameter

Bottom hole to 22-7/16" (57 cm) diameter

Each verti-karrier below the hook drum lifter is load tested at the factory at 125 of rated capacity as per american national standard ASME B30.20 and a load test certificate is enclosed with each unit. Morse verti-karrier drum lifters are not for a drum without lid or top in place.

Made in the USA

2 year warranty