Morse® 310 Series Guard Enclosure Kit & Safety Interlock For Morse Model 310-1 1PH 230V AC

Description

Guard enclosures for Morse® tilt-to-load drum tumblers have a safety interlock to automatically shut off the drum tumbler when the gate is opened. Open the enclosure gate place your drum onto the drum tumbler then close the gate to allow operation. Connections are included for air powered model only.

Morse® control packages (page 3) provide controls and connections for AC models. All Morse® control packages (see page 3) include a low-voltage transformer and wire terminals required to connect the external safety interlock switch of these guard enclosure kits. Morse® control packages and enclosures meet OSHA regulations only when installed properly with safety interlock.

Install all Morse® rotators in accordance with local requirements for enclosure and safety interlock etc. One way to accomplish this is with a Morse® enclosure with safety interlock so the rotator automatically turns off when enclosure door is opened. Power connections and motor controls must also comply with applicable local codes.

For OSHA compliance in the USA see OSHA subpart O.1910.212(a) (4) "barrels containers and drums. Revolving drums barrels and containers shall be guarded by an enclosure which is interlocked with the drive mechanism so that the barrel drum or container cannot revolve unless the guard enclosure is in place."

Features

• Enclosure and safety interlock kit for customer to install with single-phase electric (non-explosion proof) Morse® 310 series drum tumbler
• Interlock automatically shuts off machine if door is opened
• Outside post-to-post dimensions L88" x W52" x H63-1/4" (224 x 132 x 161 cm)
• Has 4 foot (121-7/8 cm) wide door opening
• 3-1/4" (8-1/4 cm) space under gate and side panels
• Gate switch