Electric Diaphragm Pump: Polypropylene Body, 1 in Fluid Connection Size, Flange Connection
In Stock
$6,475.00
Save 2%
$6,324.78
/each
Earn 6324 points for this item
($63.24 for your next purchase!)
REGISTER NOW TO EARN!
Request quantity discount pricing
You're Viewing
GRACO Electric Diaphragm Pump: Polypropylene Body,...
Mfr # TE30-0121
$6,324.78
Customers Also Viewed
No related products found.
Product Details
| Brand | GRACO |
| Contains Pesticide | N |
| Media Intake Connection Size | 1 in |
| Mounting Hardware Material | Plated Steel |
| Fluid Discharge Connection | 1 in Flange |
| Should Sales be Restricted by Region? | N |
| Contains California Prop 65 Reproductive Toxicant | N |
| Overall Width | 13.25 in |
| Fluid Connection Type | Flange Connection |
| Fluid Connection Size | 1 in |
| SDS_Message | Compliance_SDS_Yes |
| Contains California Prop 65 Carcinogen | N |
| Series | QUANTM I30 Industrial |
| Priming | Self-Priming |
| Center Section Material | Aluminum |
| Fluid Chamber Assembly Type | Bolted |
| Product Powered by Fossil Fuel | N |
| Overall Length | 16 in |
| Diaphragm Base Material | PTFE |
| Fluid Intake Connection | 1 in Flange |
| Max. Flow Rate Range | 25 to 49.9 gpm |
| Contains Volatile Organic Compounds (VOCs) | N |
| Manufacturer Part Number | TE30-0121 |
| Manifold Connection | Single Port |
| Storage Protection Code | A |
| Valve Material | PTFE |
| Viscosity (Maximum) | 20,000 cps |
| Media Intake Location | Bottom |
| Display Sell UOM | EA |
| Diaphragm Material | PTFE with EPDM Backing |
| Standards | UL / CSA |
| Media Intake Connection Type | Flange |
| Media Temperature (Minimum) | 32 Degrees F |
| Media Discharge Connection Type | Flange |
| Pump Assembly Type | Bolt |
| Check Seat Material | Polypropylene |
| Seat Material | PP |
| Port Type Combined | Flange x Flange |
| Safety Data Sheet (SDS) Applicable? | Y |
| Feet of Head (Maximum) | 29 ft |
| Flow Rate (Maximum) | 30 gpm |
| Solid Diameter (Maximum) | 0.125 in |
| Overall Height | 17.8 in |
| Displacement Per Stroke | 0.08 gal |
| Media Discharge Location | Top |
| Media Discharge Port Configuration | Center Horizontal |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Wetted Body Material | Polypropylene |
| Chemical Compatibility | Calcium Carbonate, Sodium Hypochlorite 5%, Water, Detergents, Sodium Hydroxide 50%, Sodium Hydroxide 10%, Sodium Hypochlorite 10%, Sulfuric Acid 50%, Sulfuric Acid 10%, Sodium Hydroxide 20%, Ammonium Hydroxide, Sodium Hydroxide 80%, Alcohol, Phosphoric Acid 50% |
| Pump Operation Type | Electric |
| Hazardous Location Class | Not Rated |
| Manufacturers Warranty Length | 1 yr |
| Diaphragm Backing Material | EPDM |
| Manifold Connection Type | Flange |
| Is this a Hazardous Material Product? | N |
| Valve Type | Ball |
| Media Discharge Connection Size | 1 in |
| California Biodegradable Labeling Compliance | N |
| Includes Clean In Place Technology | No Clean In Place Included |
| Operating Pressure (Maximum) | 100 psi |
| Display Qty | 1 |
| Material Conductivity | Non-Conductive |
| Media Intake Port Configuration | Center Horizontal |
| Nameplate Voltage | 100-120V AC |
| Ozone Depleting Substance | N |
| Check Valve Material | PTFE |
| Phase | Single |
| Diaphragm Reinforcement | Overmolded |
| Port Size Combined | 1 in x 1 in |
| Freight Class Code | 39 |
| Media Temperature (Maximum) | 150 Degrees F |
| Mfr. Model # | TE30-0121 |
Description
Electric Diaphragm Pump, 0.08 gal, 30 gpm