Ballymore Guardian Lift-N-Spin Scissor Lift Table Foot Operated 2000 lb. Cap. 55"L x 40"W 115V

Description

With a lowered height of only 4.25" the lift-n-spin can be loaded with a manual or electric pallet truck. This is accomplished by the exclusive auto-transition plate which provides a smooth surface from the ramp onto the rotating top. Once the lift is raised 1/4" the plate automatically lowers to allow the spinning of the rotating top. When the table is fully lowered the plate automatically raises again to provide a smooth surface to load the next pallet.

The lift-n-spin has a raised height of 35" providing an ideal height for work positioning applications. The rotating top avoids the need to walk around or reach across.

The remote power unit features a 1 HP motor. This is a highly efficient and quiet pump motor combination. A three-button control box has 115-volt single phase and runs on a 20 amp circuit. 230/460 3 phase is optional.

Features

• Meets and exceeds both u.s. (ANSI) and european safety standards
• Upper platform safety perimeter bar prevents descent on contact
• Electric circuit reset button in case the safety perimeter is actuated
• Low-tension (24v) control box with up-down buttons
• External power pack equipped with a relief valve against overloading
• Remote power unit supplied with 8' long hoses
• Compensated flow valve for controlling lowering speed
• Mechanical blocks for safe maintenance operations
• Upper limit switch
• Single acting cylinders with drainage system and check valve
• Safety clearance between scissors to prevent trapping during operation
• Self-lubricating bushings on pivot points
• Removable lifting eye(s) to facilitate handling and installation