Polyethylene Sheet: 1.5 in Thick, 24 in x 24 in, Opaque, Blue, 3, 000 psi Tensile Strength, No Break
In Stock
$906.50
/each
Earn 906 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 1.5 in Thick, 24 in x 24...
Item 892X28
$906.50
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Backing Type | No Backing |
| Maximum Temperature | 180 Degrees F |
| Color | Blue |
| Impact Strength | No Break |
| UV-Resistant | Not UV-Resistant |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Flexural Modulus | 690 MPa |
| Rockwell Hardness | 40 HRM |
| Tensile Strength | 3,000 psi |
| Plastic Width | 24 in |
| Shore Hardness | 66 Shore D |
| Friction Coefficient | 0.15 |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Elongation | Not Rated |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Plastic Length | 24 in |
| Dielectric Strength | 2.3 kV/mm |
| Static-Resistant | Not Static-Resistant |
| Plastic Clarity | Opaque |
| Material | UHMW Polyethylene |
| Plastic Thickness | 1.5 in |
| Coefficient of Thermal Expansion | 3.6 x 10^-4 K^-1 |
| Machinability | Not Rated |
| Wear Rate | Not Rated |
| Water Absorption | 0.01 % |
| Standards | FDA |
| Minimum Temperature | -70 Degrees F |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Metal Detectable | Metal Detectable |
| Scratch-Resistant | Not Scratch-Resistant |
| Mfr. Model # | PS-UHMW-MD-47 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 0 |
Description
Polyethylene Sheet, UHMW Polyethylene, Plastic Length 24 in, Plastic Width 24 in, Plastic Thickness 1.5 in, Blue, Plastic Clarity Opaque, Tensile Strength 3,000 psi, Impact Strength No Break, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in