Polyethylene Sheet: 1.25 in Thick, 24 in x 24 in, Opaque, Blue, 3, 000 psi Tensile Strength, No Break
In Stock
$758.50
/each
Earn 758 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 1.25 in Thick, 24 in x 24...
Item 892X21
$758.50
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Wear Rate | Not Rated |
| Water Absorption | 0.01 % |
| Metal Detectable | Metal Detectable |
| Static-Resistant | Not Static-Resistant |
| UV-Resistant | Not UV-Resistant |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Plastic Length | 24 in |
| Plastic Thickness | 1.25 in |
| Rockwell Hardness | 40 HRM |
| Color | Blue |
| Flexural Modulus | 690 MPa |
| Impact Strength | No Break |
| Minimum Temperature | -70 Degrees F |
| Shore Hardness | 66 Shore D |
| Scratch-Resistant | Not Scratch-Resistant |
| Machinability | Not Rated |
| Tensile Strength | 3,000 psi |
| Dielectric Strength | 2.3 kV/mm |
| Backing Type | No Backing |
| Elongation | Not Rated |
| Coefficient of Thermal Expansion | 3.6 x 10^-4 K^-1 |
| Plastic Width | 24 in |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Plastic Clarity | Opaque |
| Maximum Temperature | 180 Degrees F |
| Standards | FDA |
| Material | UHMW Polyethylene |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Friction Coefficient | 0.15 |
| Mfr. Model # | PS-UHMW-MD-40 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 0 |
Description
Polyethylene Sheet, UHMW Polyethylene, Plastic Length 24 in, Plastic Width 24 in, Plastic Thickness 1.25 in, Blue, Plastic Clarity Opaque, Tensile Strength 3,000 psi, Impact Strength No Break, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in