Polyethylene Sheet: 0.5 in Thick, 12 in x 12 in, Opaque, Blue, 3, 000 psi Tensile Strength, No Break
In Stock
$85.20
/each
Earn 85 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 0.5 in Thick, 12 in x 12...
Item 892X02
$85.20
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Color | Blue |
| Shore Hardness | 66 Shore D |
| Impact Strength | No Break |
| Standards | FDA |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Wear Rate | Not Rated |
| Friction Coefficient | 0.15 |
| Material | UHMW Polyethylene |
| Flexural Modulus | 690 MPa |
| UV-Resistant | Not UV-Resistant |
| Rockwell Hardness | 40 HRM |
| Coefficient of Thermal Expansion | 3.6 x 10^-4 K^-1 |
| Plastic Clarity | Opaque |
| Maximum Temperature | 180 Degrees F |
| Plastic Width | 12 in |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Tensile Strength | 3,000 psi |
| Metal Detectable | Metal Detectable |
| Static-Resistant | Not Static-Resistant |
| Dielectric Strength | 2.3 kV/mm |
| Water Absorption | 0.01 % |
| Backing Type | No Backing |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Machinability | Not Rated |
| Minimum Temperature | -70 Degrees F |
| Plastic Thickness | 0.5 in |
| Elongation | Not Rated |
| Plastic Length | 12 in |
| Scratch-Resistant | Not Scratch-Resistant |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Mfr. Model # | PS-UHMW-MD-21 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 0 |
Description
Polyethylene Sheet, UHMW Polyethylene, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 0.5 in, Blue, Plastic Clarity Opaque, Tensile Strength 3,000 psi, Impact Strength No Break, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in