Polyethylene Sheet: 0.5 in Thick, 24 in x 4 ft, Opaque, Blue, 3, 000 psi Tensile Strength, No Break
In Stock
$609.50
/each
Earn 609 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 0.5 in Thick, 24 in x 4 f...
Item 892WZ8
$609.50
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Plastic Width | 24 in |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Dielectric Strength | 2.3 kV/mm |
| Plastic Clarity | Opaque |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Water Absorption | 0.01 % |
| Tensile Strength | 3,000 psi |
| Minimum Temperature | -70 Degrees F |
| Metal Detectable | Metal Detectable |
| Machinability | Not Rated |
| Rockwell Hardness | 40 HRM |
| Backing Type | No Backing |
| Plastic Length | 4 ft |
| Color | Blue |
| Wear Rate | Not Rated |
| Coefficient of Thermal Expansion | 3.6 x 10^-4 K^-1 |
| UV-Resistant | Not UV-Resistant |
| Static-Resistant | Not Static-Resistant |
| Scratch-Resistant | Not Scratch-Resistant |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Flexural Modulus | 690 MPa |
| Shore Hardness | 66 Shore D |
| Standards | FDA |
| Elongation | Not Rated |
| Friction Coefficient | 0.15 |
| Impact Strength | No Break |
| Material | UHMW Polyethylene |
| Plastic Thickness | 0.5 in |
| Maximum Temperature | 180 Degrees F |
| Mfr. Model # | PS-UHMW-MD-18 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 0 |
Description
Polyethylene Sheet, UHMW Polyethylene, Plastic Length 4 ft, Plastic Width 24 in, Plastic Thickness 0.5 in, Blue, Plastic Clarity Opaque, Tensile Strength 3,000 psi, Impact Strength No Break, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in