Polyethylene Sheet: 0.375 in Thick, 12 in x 12 in, Opaque, Blue, 3, 000 psi Tensile Strength
In Stock
$66.20
/each
Earn 66 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 0.375 in Thick, 12 in x 1...
Item 892WZ4
$66.20
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Plastic Clarity | Opaque |
| Plastic Thickness | 0.375 in |
| Material | UHMW Polyethylene |
| Water Absorption | 0.01 % |
| Backing Type | No Backing |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| UV-Resistant | Not UV-Resistant |
| Friction Coefficient | 0.15 |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Plastic Width | 12 in |
| Wear Rate | Not Rated |
| Minimum Temperature | -70 Degrees F |
| Scratch-Resistant | Not Scratch-Resistant |
| Dielectric Strength | 2.3 kV/mm |
| Color | Blue |
| Flexural Modulus | 690 MPa |
| Shore Hardness | 66 Shore D |
| Tensile Strength | 3,000 psi |
| Coefficient of Thermal Expansion | 3.6 x 10^-4 K^-1 |
| Elongation | Not Rated |
| Rockwell Hardness | 40 HRM |
| Impact Strength | No Break |
| Metal Detectable | Metal Detectable |
| Standards | FDA |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Static-Resistant | Not Static-Resistant |
| Machinability | Not Rated |
| Maximum Temperature | 180 Degrees F |
| Plastic Length | 12 in |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Mfr. Model # | PS-UHMW-MD-14 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 0 |
Description
Polyethylene Sheet, UHMW Polyethylene, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 0.375 in, Blue, Plastic Clarity Opaque, Tensile Strength 3,000 psi, Impact Strength No Break, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in