Polyethylene Sheet: 0.375 in Thick, 24 in x 4 ft, Opaque, Blue, 3, 000 psi Tensile Strength, No Break
In Stock
$460.50
/each
Earn 460 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 0.375 in Thick, 24 in x 4...
Item 892WZ1
$460.50
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Machinability | Not Rated |
| Metal Detectable | Metal Detectable |
| Scratch-Resistant | Not Scratch-Resistant |
| Dielectric Strength | 2.3 kV/mm |
| Rockwell Hardness | 40 HRM |
| Backing Type | No Backing |
| Color | Blue |
| Material | UHMW Polyethylene |
| Water Absorption | 0.01 % |
| Minimum Temperature | -70 Degrees F |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Plastic Clarity | Opaque |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Elongation | Not Rated |
| Static-Resistant | Not Static-Resistant |
| Impact Strength | No Break |
| Maximum Temperature | 180 Degrees F |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| UV-Resistant | Not UV-Resistant |
| Tensile Strength | 3,000 psi |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Standards | FDA |
| Shore Hardness | 66 Shore D |
| Coefficient of Thermal Expansion | 3.6 x 10^-4 K^-1 |
| Plastic Thickness | 0.375 in |
| Wear Rate | Not Rated |
| Plastic Width | 24 in |
| Friction Coefficient | 0.15 |
| Flexural Modulus | 690 MPa |
| Plastic Length | 4 ft |
| Mfr. Model # | PS-UHMW-MD-11 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 0 |
Description
Polyethylene Sheet, UHMW Polyethylene, Plastic Length 4 ft, Plastic Width 24 in, Plastic Thickness 0.375 in, Blue, Plastic Clarity Opaque, Tensile Strength 3,000 psi, Impact Strength No Break, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in