Polyethylene Sheet: 0.25 in Thick, 12 in x 24 in, Opaque, Blue, 3, 000 psi Tensile Strength, No Break
In Stock
$85.20
/each
Earn 85 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 0.25 in Thick, 12 in x 24...
Item 892WY6
$85.20
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Water Absorption | 0.01 % |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Static-Resistant | Not Static-Resistant |
| Elongation | Not Rated |
| Friction Coefficient | 0.15 |
| Material | UHMW Polyethylene |
| Shore Hardness | 66 Shore D |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Flexural Modulus | 690 MPa |
| Color | Blue |
| Machinability | Not Rated |
| Scratch-Resistant | Not Scratch-Resistant |
| Standards | FDA |
| Backing Type | No Backing |
| Coefficient of Thermal Expansion | 3.6 x 10^-4 K^-1 |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Maximum Temperature | 180 Degrees F |
| Plastic Clarity | Opaque |
| Rockwell Hardness | 40 HRM |
| Impact Strength | No Break |
| Plastic Width | 12 in |
| Metal Detectable | Metal Detectable |
| Dielectric Strength | 2.3 kV/mm |
| Plastic Thickness | 0.25 in |
| Tensile Strength | 3,000 psi |
| Minimum Temperature | -70 Degrees F |
| UV-Resistant | Not UV-Resistant |
| Wear Rate | Not Rated |
| Plastic Length | 24 in |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Mfr. Model # | PS-UHMW-MD-6 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 0 |
Description
Polyethylene Sheet, UHMW Polyethylene, Plastic Length 24 in, Plastic Width 12 in, Plastic Thickness 0.25 in, Blue, Plastic Clarity Opaque, Tensile Strength 3,000 psi, Impact Strength No Break, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in