Polyethylene Sheet: 0.25 in Thick, 24 in x 24 in, Opaque, Blue, 3, 000 psi Tensile Strength, No Break
In Stock
$161.00
/each
Earn 161 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 0.25 in Thick, 24 in x 24...
Item 892WY5
$161.00
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Plastic Clarity | Opaque |
| Rockwell Hardness | 40 HRM |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Elongation | Not Rated |
| Plastic Thickness | 0.25 in |
| Backing Type | No Backing |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Scratch-Resistant | Not Scratch-Resistant |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Impact Strength | No Break |
| Color | Blue |
| Static-Resistant | Not Static-Resistant |
| UV-Resistant | Not UV-Resistant |
| Machinability | Not Rated |
| Water Absorption | 0.01 % |
| Minimum Temperature | -70 Degrees F |
| Maximum Temperature | 180 Degrees F |
| Flexural Modulus | 690 MPa |
| Material | UHMW Polyethylene |
| Shore Hardness | 66 Shore D |
| Tensile Strength | 3,000 psi |
| Coefficient of Thermal Expansion | 3.6 x 10^-4 K^-1 |
| Plastic Length | 24 in |
| Wear Rate | Not Rated |
| Standards | FDA |
| Metal Detectable | Metal Detectable |
| Friction Coefficient | 0.15 |
| Plastic Width | 24 in |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Dielectric Strength | 2.3 kV/mm |
| Mfr. Model # | PS-UHMW-MD-5 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 0 |
Description
Polyethylene Sheet, UHMW Polyethylene, Plastic Length 24 in, Plastic Width 24 in, Plastic Thickness 0.25 in, Blue, Plastic Clarity Opaque, Tensile Strength 3,000 psi, Impact Strength No Break, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in