Polyethylene Rod: 3/4 in Dia, 24 in Lg, Opaque, White, 5, 800 psi Tensile Strength, No Break
In Stock
$17.47
/each
Earn 17 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Rod: 3/4 in Dia, 24 in Lg, Opaqu...
Item 892LW3
$17.47
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Tensile Strength | 5,800 psi |
| Minimum Temperature | -22 Degrees F |
| Fabrication | Molded |
| Friction Coefficient | 0.12 |
| Impact Strength | No Break |
| Material | UHMW Polyethylene |
| Coefficient of Thermal Expansion | 11 x 10^-5 in/in/ Degrees F |
| UV-Resistant | Not UV-Resistant |
| Metal Detectable | Not Metal Detectable |
| Dielectric Strength | 900 V/mil |
| Flexural Modulus | 125,000 psi |
| Standards | USDA, FDA, 3-A Dairy |
| Temperature Range | -22 Degrees F to 180 Degrees F |
| Scratch-Resistant | Scratch-Resistant |
| Rockwell Hardness | 64 HRR |
| Light Transmission | 90 % |
| Color | White |
| Water Absorption | 0.01 % |
| Plastic Length | 24 in |
| Wear Rate | 6.75 x 10^-4 cu mm/N-m |
| Plastic Clarity | Opaque |
| Maximum Temperature | 180 Degrees F |
| FDA Compliance | 21 CFR 177.1520 |
| Static-Resistant | Not Static-Resistant |
| Shore Hardness | 66 Shore D |
| Machinability | 85 % |
| Plastic Diameter | 3/4 in |
| Mfr. Model # | RUHMWNA.750 |
| Country of Origin | Germany (subject to change) |
| UNSPSC | 0 |
Description
Polyethylene Rod, UHMW Polyethylene, Plastic Length 24 in, Plastic Diameter 3/4 in, White, Plastic Clarity Opaque, Minimum Temperature -22 Degrees F, Maximum Temperature 180 Degrees F, Tensile Strength 5,800 psi, Impact Strength No Break, Friction Coefficient 0.12, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in