LDPE Bar: 0.125 in Thick, 2 in x 8 ft, Opaque, Off-White, 1, 800 psi Tensile Strength, No Break
In Stock
$44.15
/each
Earn 44 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR LDPE Bar: 0.125 in Thick, 2 in x 8 ft, Opaque...
Item 892KK8
$44.15
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Friction Coefficient | 0.3 |
| Impact Strength | No Break |
| Wear Rate | 2.59 x 10^-3 cu mm/N-m |
| Metal Detectable | Not Metal Detectable |
| Minimum Adhesive Temperature | 65 Degrees F |
| Plastic Width | 2 in |
| Shore Hardness | 41 Shore D |
| Color | Off-White |
| Plastic Thickness | 0.125 in |
| Static-Resistant | Not Static-Resistant |
| UV-Resistant | Not UV-Resistant |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Material | LDPE |
| Tensile Strength | 1,800 psi |
| Light Transmission | 44.43 % |
| Tensile Strength Rating | Poor (0 to 4,999 psi) |
| Plastic Clarity | Opaque |
| Standards | ASTM D4976/ASTM D4635/IS 3395 |
| Maximum Adhesive Temperature | 400 Degrees F |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Flexural Modulus | 207 MPa |
| FDA Compliance | 21 CFR 177.1520 |
| Fabrication | Extruded |
| Scratch-Resistant | Not Scratch-Resistant |
| Plastic Length | 8 ft |
| Dielectric Strength | 160 mV/m |
| Water Absorption | 0.01 % |
| Rockwell Hardness | 41 HRR |
| Coefficient of Thermal Expansion | 3 x 10^-5 in/ Degrees F |
| Machinability | 90 % |
| Temperature Range | -40 Degrees F to 160 Degrees F |
| Mfr. Model # | SLDPENA.125X2.000X96.000[Case Of 12] |
| Country of Origin | USA (subject to change) |
| UNSPSC | 0 |
Description
LDPE Bar, LDPE, Plastic Length 8 ft, Plastic Width 2 in, Plastic Thickness 0.125 in, Off-White, Plastic Clarity Opaque, Tensile Strength 1,800 psi, Impact Strength No Break, Friction Coefficient 0.3, Water Absorption 0.01 Percent. Only shipped in quantities of 12.