Polyethylene Sheet: 0.75 in Thick, 4 ft x 10 ft, Opaque, Blue, 5, 800 psi Tensile Strength, No Break
In Stock
$8,466.00
/each
Earn 8466 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 0.75 in Thick, 4 ft x 10...
Item 892KJ4
$8,466.00
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| FDA Compliance | 21 CFR 177.1520 |
| Plastic Clarity | Opaque |
| Plastic Width | 4 ft |
| Flexural Modulus | 125,000 psi |
| Temperature Range | -22 Degrees F to 180 Degrees F |
| Plastic Length | 10 ft |
| Metal Detectable | Metal Detectable |
| Tensile Strength | 5,800 psi |
| Color | Blue |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Plastic Thickness | 0.75 in |
| Material | UHMW Polyethylene |
| Dielectric Strength | 900 V/mil |
| Rockwell Hardness | 64 HRM |
| Water Absorption | 0.01 % |
| Machinability | 85 % |
| Impact Strength | No Break |
| Light Transmission | 90 % |
| UV-Resistant | Not UV-Resistant |
| Friction Coefficient | 0.12 |
| Coefficient of Thermal Expansion | 11 x 10^-5 in/in/ Degrees F |
| Maximum Temperature | 180 Degrees F |
| Minimum Adhesive Temperature | 0 Degrees F |
| Shore Hardness | 66 Shore D |
| Scratch-Resistant | Scratch-Resistant |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Maximum Adhesive Temperature | 180 Degrees F |
| Wear Rate | 2.80 x 10^-7 cu mm/N-m |
| Elongation | 300 % |
| Standards | FDA, ASTM D4020, USDA, 3-A Dairy |
| Static-Resistant | Not Static-Resistant |
| Minimum Temperature | -22 Degrees F |
| Mfr. Model # | SUHMWMDT.750X48.000X120.000 |
| Country of Origin | Germany (subject to change) |
| UNSPSC | 0 |
Description
Polyethylene Sheet, UHMW Polyethylene, Plastic Length 10 ft, Plastic Width 4 ft, Plastic Thickness 0.75 in, Blue, Plastic Clarity Opaque, Tensile Strength 5,800 psi, Impact Strength No Break, Friction Coefficient 0.12, Water Absorption 0.01 Percent, Plastic Density 0.93 g/cc