Submersible Sump Pump: 1/2 hp, 115V AC, 65 gpm Flow Rate @ 10' of Head, 2 in FNPT
In Stock
$414.50
/each
Earn 414 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
PRO SERIES PUMPS Submersible Sump Pump: 1/2 hp, 115V AC, 65 gp...
Item 858XJ8
$414.50
Customers Also Viewed
No related products found.
Product Details
| Brand | PRO SERIES PUMPS |
| Operation | Automatic |
| Impeller Material | Polycarbonate |
| Sump Pit Diameter - Minimum | 18 in |
| Standards | CSA |
| Impeller Design | Open |
| Rated Voltage | 115V AC |
| Horsepower | 1/2 hp |
| Gauge/Conductor | 16/3 |
| For Industry | Residential, Commercial |
| Cord Length | 20 ft |
| Switch Electrical Connection | Piggyback |
| Shaft Seal Type | Double Mechanical |
| NEC Cord Designation | SJTW |
| Thermal Protection | Auto |
| Hazardous Location Class | Not Rated |
| Power Source | Corded Electric |
| Frequency | 60 Hz |
| Switch Actuation | Tether Float |
| Current | 4.30 A |
| Manufacturers Warranty Length | 5 yr |
| Duty Cycle | Continuous |
| For Media Type | Clear Water |
| Flow Rate @ 10 ft of Head | 65 gpm |
| Feet of Head - Maximum | 33 ft |
| Phase | Single |
| Series | Pro Series |
| Discharge | 2 in FNPT |
| Motor Housing Material | Stainless Steel |
| Liquid Temperature - Maximum | 104 Degrees F |
| Volute Material | Cast Iron |
| Shaft Seal Material | Carbon/Ceramic/Nitrile Rubber |
| Solids Diameter - Maximum | 1/4 in |
| Mfr. Model # | S3050-TS |
| Country of Origin | Taiwan (subject to change) |
| UNSPSC | 0 |
Description
Submersible Sump Pump, Rated Voltage 115V AC, Switch Actuation Tether Float, Switch Electrical Connection Piggyback, Off Point Not Applicable, On Point Not Applicable, Impeller Material Polycarbonate, Overall Height 13 3/8 in, Thermal Protection Auto, Width at Widest Point Not Applicable, Duty Cycle Continuous, Cord Length 20 ft, NEC Cord Designation SJTW, Gauge/Conductor 16/3, Manufacturers Warranty Length 5 yr