Submersible Sump Pump: 1/3 hp, 115V AC, 50 gpm Flow Rate @ 10' of Head, Dewatering
In Stock
$377.50
/each
Earn 377 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
PRO SERIES PUMPS Submersible Sump Pump: 1/3 hp, 115V AC, 50 gp...
Item 858XJ3
$377.50
Customers Also Viewed
No related products found.
Product Details
| Brand | PRO SERIES PUMPS |
| Feet of Head - Maximum | 30 ft |
| Rated Voltage | 115V AC |
| Power Source | Corded Electric |
| Discharge | 1-1/2 in FNPT |
| Switch Electrical Connection | Piggyback |
| Cord Length | 10 ft |
| Current | 4.00 A |
| Gauge/Conductor | 16/3 |
| Liquid Temperature - Maximum | 104 Degrees F |
| Solids Diameter - Maximum | 1/4 in |
| Sump Pit Diameter - Minimum | 18 in |
| Thermal Protection | Auto |
| Flow Rate @ 10 ft of Head | 50 gpm |
| For Industry | Residential, Commercial |
| NEC Cord Designation | SJTW |
| Series | Pro Series |
| Duty Cycle | Continuous |
| Motor Housing Material | Stainless Steel |
| Frequency | 60 Hz |
| Hazardous Location Class | Not Rated |
| Impeller Design | Open |
| Standards | CSA |
| Switch Actuation | Vertical Float |
| Shaft Seal Type | Double Mechanical |
| Manufacturers Warranty Length | 5 yr |
| Shaft Seal Material | Carbon/Ceramic/Nitrile Rubber |
| Volute Material | Cast Iron |
| Impeller Material | Polycarbonate |
| Phase | Single |
| Horsepower | 1/3 hp |
| For Media Type | Clear Water |
| Operation | Automatic |
| Mfr. Model # | S3033-VS |
| Country of Origin | Taiwan (subject to change) |
| UNSPSC | 0 |
Description
Submersible Sump Pump, Rated Voltage 115V AC, Switch Actuation Vertical Float, Switch Electrical Connection Piggyback, Off Point Not Applicable, On Point Not Applicable, Impeller Material Polycarbonate, Overall Height 13 in, Thermal Protection Auto, Width at Widest Point 4 1/4 in, Duty Cycle Continuous, Cord Length 10 ft, NEC Cord Designation SJTW, Gauge/Conductor 16/3, Manufacturers Warranty Length 5 yr