Submersible Sump Pump: 1/3 hp, 115V AC, 50 gpm Flow Rate @ 10' of Head, Dewatering
In Stock
$359.50
/each
Earn 359 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
PRO SERIES PUMPS Submersible Sump Pump: 1/3 hp, 115V AC, 50 gp...
Item 858XJ2
$359.50
Customers Also Viewed
No related products found.
Product Details
| Brand | PRO SERIES PUMPS |
| Impeller Design | Open |
| Power Source | Corded Electric |
| Manufacturers Warranty Length | 5 yr |
| Phase | Single |
| Thermal Protection | Auto |
| Cord Length | 10 ft |
| Duty Cycle | Continuous |
| Hazardous Location Class | Not Rated |
| Volute Material | Cast Iron |
| Shaft Seal Material | Carbon/Ceramic/Nitrile Rubber |
| NEC Cord Designation | SJTW |
| Shaft Seal Type | Double Mechanical |
| For Media Type | Clear Water |
| Standards | CSA |
| Switch Electrical Connection | Piggyback |
| Motor Housing Material | Stainless Steel |
| Impeller Material | Polycarbonate |
| Rated Voltage | 115V AC |
| Gauge/Conductor | 16/3 |
| Horsepower | 1/3 hp |
| Frequency | 60 Hz |
| Sump Pit Diameter - Minimum | 18 in |
| Flow Rate @ 10 ft of Head | 50 gpm |
| Solids Diameter - Maximum | 1/4 in |
| Series | Pro Series |
| Feet of Head - Maximum | 30 ft |
| Current | 4.00 A |
| Operation | Automatic |
| Discharge | 1-1/2 in FNPT |
| For Industry | Residential, Commercial |
| Liquid Temperature - Maximum | 104 Degrees F |
| Switch Actuation | Tether Float |
| Mfr. Model # | S3033-TS |
| Country of Origin | Taiwan (subject to change) |
| UNSPSC | 0 |
Description
Submersible Sump Pump, Rated Voltage 115V AC, Switch Actuation Tether Float, Switch Electrical Connection Piggyback, Off Point Not Applicable, On Point Not Applicable, Impeller Material Polycarbonate, Overall Height 13 in, Thermal Protection Auto, Width at Widest Point Not Applicable, Duty Cycle Continuous, Cord Length 10 ft, NEC Cord Designation SJTW, Gauge/Conductor 16/3, Manufacturers Warranty Length 5 yr