Submersible Sump Pump: 1/3 hp, 115V AC, 54 gpm Flow Rate @ 10' of Head, 1 1/2 in FNPT
In Stock
$919.00
/each
Earn 919 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
LITTLE GIANT Submersible Sump Pump: 1/3 hp, 115V AC, 54 gp...
Item 834EE8
$919.00
Customers Also Viewed
No related products found.
Product Details
| Brand | LITTLE GIANT |
| Hazardous Location Class | Not Rated |
| Volute Material | Cast Iron |
| Gauge/Conductor | 16/3 |
| Thermal Protection | Auto |
| Manufacturers Warranty Length | 3 yr |
| Series | HT-6EN-CIA-FS |
| Current | 6.5 A |
| Rated Voltage | 115V AC |
| Shaft Seal Type | Single Mechanical |
| Standards | cCSAus |
| Impeller Design | Non-Clog |
| For Industry | Residential |
| Frequency | 60 Hz |
| Liquid Temperature - Maximum | 200 Degrees F |
| Sump Pit Diameter - Minimum | 18 in |
| Feet of Head - Maximum | 25 ft |
| Discharge | 1-1/2 in FNPT |
| Horsepower | 1/3 hp |
| Power Source | Corded Electric |
| NEC Cord Designation | SJTW |
| Solids Diameter - Maximum | 3/4 in |
| Switch Actuation | Tether Float |
| Impeller Material | Nylon |
| Flow Rate @ 10 ft of Head | 54 gpm |
| For Media Type | Effluent Water |
| Motor Housing Material | Cast Iron |
| Duty Cycle | Continuous |
| Operation | Automatic |
| Phase | Single |
| Switch Electrical Connection | Integral |
| Shaft Seal Material | Carbon/ Ceramic/Nitrile Rubber |
| Cord Length | 15 ft |
| Mfr. Model # | HT-6EN-CIA-FS |
| Country of Origin | Mexico (subject to change) |
| UNSPSC | 0 |
Description
Submersible Sump Pump, Rated Voltage 115V AC, Switch Actuation Tether Float, Switch Electrical Connection Integral, Off Point 2 - 4 in, On Point 9 - 14 in, Impeller Material Nylon, Overall Height 11 1/4 in, Thermal Protection Auto, Width at Widest Point 9 5/8 in, Duty Cycle Continuous, Cord Length 15 ft, NEC Cord Designation SJTW, Gauge/Conductor 16/3, Manufacturers Warranty Length 3 yr