Double Diaphragm Pump: Polypropylene Body, 1/2 in, NPT Connection, 15 gpm, 231 ft Max. Head
In Stock
$773.50
Save 13%
$675.17
/each
Earn 675 points for this item
($6.75 for your next purchase!)
REGISTER NOW TO EARN!
ETA 5-7 BUSINESS DAYS
Request quantity discount pricing
You're Viewing
DAYTON Double Diaphragm Pump: Polypropylene Body, 1/...
Mfr # 6PY39
$675.17
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2547 |
| Brand | DAYTON |
| Seat Material | PP |
| Includes California Prop 65 Short-Form Warning | Y |
| Check Valve Material | PTFE |
| Pump Operation Type | Air |
| Flow Rate @ 80 psi | 13 gpm |
| Prop65_WarningMessage | Compliance_Prop65_Short_CancerandRepro |
| Manufacturer Part Number | 6PY39 |
| Diaphragm Reinforcement | Not Reinforced |
| Fluid Connection Size | 1/2 in |
| Flow Rate @ 40 psi | 10 gpm |
| Media Intake Connection Type | NPT |
| Air Connection Size | 1/4 in |
| Display Qty | 1 |
| Port Location | Bottom Top |
| Fluid Connection Type | NPT Connection |
| Port Type Combined | NPT x NPT |
| Media Intake Location | Bottom |
| Operating Pressure (Maximum) | 100 psi |
| Contains California Prop 65 Carcinogen | Y |
| Valve Type | Flat |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Flow Rate (Maximum) | 15 gpm |
| Check Seat Material | Polypropylene |
| Display Sell UOM | EA |
| Pump Assembly Type | Bolt |
| Duty Cycle | Continuous |
| Center Section Material | Polypropylene |
| Displacement Per Stroke | 0.0169 gal |
| Includes Solenoid | No Solenoid Included |
| Fluid Discharge Connection | 1/2 in NPT |
| Material Conductivity | Conductive |
| Max. Flow Rate Range | 10 to 24.9 gpm |
| Overall Width | 7 in |
| Media Discharge Connection Type | NPT |
| Is this a Hazardous Material Product? | N |
| Wetted Body Material | Polypropylene |
| Mounting Hardware Material | Steel |
| Air Consumption (Maximum) | 17 scfm |
| Contains California Prop 65 Reproductive Toxicant | Y |
| Media Intake Port Configuration | Side |
| Fluid Chamber Assembly Type | Bolted |
| Media Discharge Location | Top |
| Storage Protection Code | A |
| Media Intake Connection Size | 1/2 in |
| Overall Size | 8.7 in x 7 in x 11.7 in |
| Solid Diameter (Maximum) | 0.03 in |
| Overall Length | 8.7 in |
| Manufacturers Warranty Length | 1 yr |
| Media Discharge Connection Size | 1/2 in |
| Diaphragm Material | PTFE |
| Manifold Connection Standard | NPT |
| Air Inlet | 1/4 in FNPT |
| Air Intake Pressure (Maximum) | 100 psi |
| Priming | Self-Priming |
| Diaphragm Base Material | PTFE |
| Includes Clean In Place Technology | No Clean In Place Included |
| Valve Material | PTFE |
| Flow Rate @ 60 psi | 11.75 gpm |
| Freight Class Code | 39 |
| Media Temperature (Minimum) | 40 Degrees F |
| Overall Height | 11.7 in |
| Ozone Depleting Substance | N |
| Feet of Head (Maximum) | 231 ft |
| Port Size Combined | 1/2 in x 1/2 in |
| Fluid Intake Connection | 1/2 in NPT |
| Includes | Manual, Ball Valve |
| Media Discharge Port Configuration | Side |
| Flow Rate @ 20 psi | 6 gpm |
| Air Connection Type | FNPT |
| For Use With Potable Systems | No |
| Manifold Port Connection Type | Single Port |
| Flow Rate @ 100 psi | 15 gpm |
| Viscosity (Maximum) | 15,000 cps |
| Media Temperature (Maximum) | 180 Degrees F |
| Chemical Compatibility | Sodium Hypochlorite 5%, Hydrochloric Acid 30%, Sodium Hydroxide 50%, Sodium Hydroxide 10%, Phosphoric Acid 60%, Kerosene, Sulfuric Acid 10%, Potassium Hydroxide 50%, Hydrochloric Acid 20%, Sodium Hydroxide 80%, Oil-Based Paint, Sodium Hypochlorite 20%, Hydrochloric Acid 100%, Phosphoric Acid 70%, Phosphoric Acid 100%, Calcium Carbonate, Water, Detergents, Diesel, Sodium Hypochlorite 10%, Phosphoric Acid 40%, Phosphoric Acid 80%, Hydraulic Fluid, Phosphoric Acid 90%, Antifreeze, Sodium Hydroxide 20%, Hydrochloric Acid 40%, Alcohol, Motor Oil, Phosphoric Acid 50%, Diesel Exhaust Fluid |
| Safety Data Sheet (SDS) Applicable? | N |
| Mfr. Model # | 6PY39 |
Description
DblDiaphragmPump, 1/4inFNPT, PTFE, 15gpm