Polyethylene Sheet: 1 in Thick, 4 ft x 10 ft, Opaque, Blue, 5, 800 psi Tensile Strength, No Break
In Stock
$5,893.00
/each
Earn 5893 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 1 in Thick, 4 ft x 10 ft,...
Item 6NFH8
$5,893.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2094 |
| Brand | APPROVED VENDOR |
| Friction Coefficient | 0.12 |
| Coefficient of Thermal Expansion | Not Rated |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Metal Detectable | Not Metal Detectable |
| Plastic Clarity | Opaque |
| Shore Hardness | 65 Shore D |
| Scratch-Resistant | Not Scratch-Resistant |
| Elongation | 285 % |
| Temperature Range | -22 Degrees F to 180 Degrees F |
| Minimum Temperature | -22 Degrees F |
| Flexural Modulus | 430 MPa |
| Plastic Width | 4 ft |
| Dielectric Strength | 91 kV/mm |
| Tensile Strength | 5,800 psi |
| Water Absorption | 0.01 % |
| Maximum Temperature | 180 Degrees F |
| Impact Strength | No Break |
| Material | UHMW Polyethylene |
| Backing Type | No Backing |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| UV-Resistant | Not UV-Resistant |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Plastic Length | 10 ft |
| Static-Resistant | Not Static-Resistant |
| Wear Rate | Not Rated |
| Rockwell Hardness | 35 HRM |
| Filler Material | Glass |
| Plastic Thickness | 1 in |
| Standards | Not Rated |
| Color | Blue |
| Machinability | 100 % |
| Mfr. Model # | PS-UHMW-GF-214 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30102515 |
Description
Polyethylene Sheet, UHMW Polyethylene, Grade Glass-Filled, Plastic Length 10 ft, Plastic Width 4 ft, Plastic Thickness 1 in, Blue, Plastic Clarity Opaque, Tensile Strength 5,800 psi, Impact Strength No Break, Friction Coefficient 0.12, Water Absorption 0.01 Percent, Temperature Range -22 Degrees to 180 Degrees F, Plastic Density 0.038 lb/cu in, Plastic Hardness 69D