HDPE Sheet: 1 in Thick, 6 in x 6 in, Opaque, Black, 4, 000 psi Tensile Strength, 1.1 ft-lb/in
In Stock
$59.05
/each
Earn 59 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR HDPE Sheet: 1 in Thick, 6 in x 6 in, Opaque,...
Item 60TL69
$59.05
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Friction Coefficient | 0.31 |
| Maximum Temperature | 180 Degrees F |
| Water Absorption | 0.05 % |
| Shore Hardness | 64 Shore D |
| Backing Type | No Backing |
| Standards | Not Rated |
| Tensile Strength | 4,000 psi |
| Metal Detectable | Not Metal Detectable |
| Plastic Length | 6 in |
| Temperature Range | -100 Degrees F to 180 Degrees F |
| UV-Resistant | UV-Resistant |
| Color | Black |
| Wear Rate | Not Rated |
| Rockwell Hardness | 50 HRM |
| Material | HDPE |
| Scratch-Resistant | Not Scratch-Resistant |
| Plastic Width | 6 in |
| Dielectric Strength | Not Rated |
| Plastic Thickness | 1 in |
| Plastic Clarity | Opaque |
| Machinability | Not Rated |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Coefficient of Thermal Expansion | Not Rated |
| Minimum Temperature | -100 Degrees F |
| Water Absorption Rating | Good (0.05% to 0.25%), Excellent (0% to 0.05%) |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Flexural Modulus | Not Rated |
| Impact Strength | 1.1 ft-lb/in |
| Static-Resistant | Not Static-Resistant |
| Mfr. Model # | BULK-PS-PE-970 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 0 |
Description
HDPE Sheet, HDPE, Grade Marine, Plastic Length 6 in, Plastic Width 6 in, Plastic Thickness 1 in, Black, Plastic Clarity Opaque, Tensile Strength 4,000 psi, Impact Strength 1.1 ft-lb/in, Friction Coefficient 0.31, Water Absorption 0.05 Percent, Temperature Range -100 Degrees to 180 Degrees F, Plastic Density 0.034 lb/cu in, Plastic Hardness 64D