HDPE Bar: 0.25 in Thick, 2.5 in x 12 in, Opaque, Black, 4, 000 psi Tensile Strength, 1.1 ft-lb/in
In Stock
$4.66
/each
Earn 4 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR HDPE Bar: 0.25 in Thick, 2.5 in x 12 in, Opaq...
Item 60TK63
$4.66
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Maximum Temperature | 180 Degrees F |
| Plastic Clarity | Opaque |
| Dielectric Strength | Not Rated |
| Machinability | Not Rated |
| Plastic Length | 12 in |
| Water Absorption | 0.05 % |
| Friction Coefficient | 0.31 |
| UV-Resistant | UV-Resistant |
| Color | Black |
| Plastic Thickness | 0.25 in |
| Material | HDPE |
| Coefficient of Thermal Expansion | Not Rated |
| Backing Type | No Backing |
| Plastic Width | 2.5 in |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Flexural Modulus | Not Rated |
| Impact Strength | 1.1 ft-lb/in |
| Scratch-Resistant | Not Scratch-Resistant |
| Static-Resistant | Not Static-Resistant |
| Minimum Temperature | -100 Degrees F |
| Water Absorption Rating | Good (0.05% to 0.25%), Excellent (0% to 0.05%) |
| Rockwell Hardness | 85 HRR |
| Standards | Not Rated |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Tensile Strength | 4,000 psi |
| Temperature Range | -100 Degrees F to 180 Degrees F |
| Wear Rate | Not Rated |
| Shore Hardness | 64 Shore D |
| Metal Detectable | Not Metal Detectable |
| Mfr. Model # | BULK-PS-PE-861 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 30101615 |
Description
HDPE Bar, HDPE, Marine, Plastic Length 12 in, Plastic Width 2.5 in, Plastic Thickness 0.25 in, Black, Plastic Clarity Opaque, Tensile Strength 4,000 psi, Impact Strength 1.1 ft-lb/in, Friction Coefficient 0.31, Water Absorption 0.05 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good