HDPE Bar: 0.75 in Thick, 4 in x 24 in, Opaque, White, 4, 000 psi Tensile Strength, 1.1 ft-lb/in
In Stock
$38.95
/each
Earn 38 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR HDPE Bar: 0.75 in Thick, 4 in x 24 in, Opaque...
Item 60TJ87
$38.95
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Friction Coefficient | 0.31 |
| Material | HDPE |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Backing Type | No Backing |
| Dielectric Strength | Not Rated |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Color | White |
| Maximum Temperature | 180 Degrees F |
| Metal Detectable | Not Metal Detectable |
| Shore Hardness | 64 Shore D |
| Plastic Width | 4 in |
| Temperature Range | -100 Degrees F to 180 Degrees F |
| Scratch-Resistant | Not Scratch-Resistant |
| Flexural Modulus | Not Rated |
| Plastic Thickness | 0.75 in |
| Plastic Length | 24 in |
| Machinability | Not Rated |
| Static-Resistant | Not Static-Resistant |
| Tensile Strength | 4,000 psi |
| Coefficient of Thermal Expansion | Not Rated |
| Rockwell Hardness | 85 HRR |
| Wear Rate | Not Rated |
| Impact Strength | 1.1 ft-lb/in |
| Plastic Clarity | Opaque |
| Water Absorption | 0.05 % |
| Water Absorption Rating | Good (0.05% to 0.25%), Excellent (0% to 0.05%) |
| Standards | Not Rated |
| UV-Resistant | UV-Resistant |
| Minimum Temperature | -100 Degrees F |
| Mfr. Model # | BULK-PS-PE-778 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 30101615 |
Description
HDPE Bar, HDPE, Marine, Plastic Length 24 in, Plastic Width 4 in, Plastic Thickness 0.75 in, White, Plastic Clarity Opaque, Tensile Strength 4,000 psi, Impact Strength 1.1 ft-lb/in, Friction Coefficient 0.31, Water Absorption 0.05 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good