HDPE Sheet: 0.75 in Thick, 12 in x 24 in, Opaque, White, 4, 000 psi Tensile Strength, 1.1 ft-lb/in
In Stock
$129.50
/each
Earn 129 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR HDPE Sheet: 0.75 in Thick, 12 in x 24 in, Opa...
Item 60TJ55
$129.50
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Static-Resistant | Not Static-Resistant |
| Flexural Modulus | Not Rated |
| Minimum Temperature | -100 Degrees F |
| Color | White |
| Metal Detectable | Not Metal Detectable |
| Wear Rate | Not Rated |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Friction Coefficient | 0.31 |
| Water Absorption Rating | Good (0.05% to 0.25%), Excellent (0% to 0.05%) |
| Plastic Clarity | Opaque |
| Machinability | Not Rated |
| Water Absorption | 0.05 % |
| Plastic Thickness | 0.75 in |
| Temperature Range | -100 Degrees F to 180 Degrees F |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Material | HDPE |
| Coefficient of Thermal Expansion | Not Rated |
| Scratch-Resistant | Not Scratch-Resistant |
| Tensile Strength | 4,000 psi |
| Rockwell Hardness | 50 HRM |
| Maximum Temperature | 180 Degrees F |
| Impact Strength | 1.1 ft-lb/in |
| Plastic Length | 24 in |
| Dielectric Strength | Not Rated |
| Shore Hardness | 64 Shore D |
| Backing Type | No Backing |
| Plastic Width | 12 in |
| Standards | Not Rated |
| UV-Resistant | UV-Resistant |
| Mfr. Model # | BULK-PS-PE-742 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 30102515 |
Description
HDPE Sheet, HDPE, Grade Marine, Plastic Length 24 in, Plastic Width 12 in, Plastic Thickness 0.75 in, White, Plastic Clarity Opaque, Tensile Strength 4,000 psi, Impact Strength 1.1 ft-lb/in, Friction Coefficient 0.31, Water Absorption 0.05 Percent, Temperature Range -100 Degrees to 180 Degrees F, Plastic Density 0.034 lb/cu in, Plastic Hardness 64D