UHMW Polyethylene Bar: 0.75 in Thick, 0.5 in x 4 ft, Opaque, Gray, 4, 000 psi Tensile Strength
In Stock
$18.69
/each
Earn 18 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.75 in Thick, 0.5 in...
Item 60RW42
$18.69
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Rockwell Hardness | 85 HRR |
| UV-Resistant | Not UV-Resistant |
| Color | Gray |
| Static-Resistant | Not Static-Resistant |
| Shore Hardness | 65 Shore D |
| Impact Strength | No Break |
| Plastic Width | 0.5 in |
| Wear Rate | Not Rated |
| Metal Detectable | Not Metal Detectable |
| Tensile Strength | 4,000 psi |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Flexural Modulus | 400 MPa |
| Filler Material | Oil |
| Dielectric Strength | 90.6 kV/mm |
| Minimum Temperature | -70 Degrees F |
| Plastic Clarity | Opaque |
| Water Absorption | 0.01 % |
| Plastic Length | 4 ft |
| Standards | Not Rated |
| Maximum Temperature | 180 Degrees F |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Backing Type | No Backing |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Machinability | 100 % |
| Friction Coefficient | 0.14 |
| Scratch-Resistant | Not Scratch-Resistant |
| Material | UHMW Polyethylene |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Coefficient of Thermal Expansion | Not Rated |
| Plastic Thickness | 0.75 in |
| Mfr. Model # | PS-UHMW-OF-54 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Oil-Filled, Plastic Length 4 ft, Plastic Width 0.5 in, Plastic Thickness 0.75 in, Gray, Plastic Clarity Opaque, Tensile Strength 4,000 psi, Impact Strength No Break, Friction Coefficient 0.14, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good