UHMW Polyethylene Bar: 0.75 in Thick, 0.5 in x 24 in, Opaque, Gray, 4, 000 psi Tensile Strength
In Stock
$12.66
/each
Earn 12 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.75 in Thick, 0.5 in...
Item 60RW41
$12.66
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Static-Resistant | Not Static-Resistant |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Water Absorption | 0.01 % |
| Color | Gray |
| Maximum Temperature | 180 Degrees F |
| Plastic Thickness | 0.75 in |
| Plastic Width | 0.5 in |
| Wear Rate | Not Rated |
| Standards | Not Rated |
| Machinability | 100 % |
| Friction Coefficient | 0.14 |
| Metal Detectable | Not Metal Detectable |
| Tensile Strength | 4,000 psi |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Dielectric Strength | 90.6 kV/mm |
| Backing Type | No Backing |
| Filler Material | Oil |
| Rockwell Hardness | 85 HRR |
| UV-Resistant | Not UV-Resistant |
| Plastic Length | 24 in |
| Coefficient of Thermal Expansion | Not Rated |
| Scratch-Resistant | Not Scratch-Resistant |
| Minimum Temperature | -70 Degrees F |
| Impact Strength | No Break |
| Material | UHMW Polyethylene |
| Flexural Modulus | 400 MPa |
| Shore Hardness | 65 Shore D |
| Plastic Clarity | Opaque |
| Mfr. Model # | PS-UHMW-OF-53 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Oil-Filled, Plastic Length 24 in, Plastic Width 0.5 in, Plastic Thickness 0.75 in, Gray, Plastic Clarity Opaque, Tensile Strength 4,000 psi, Impact Strength No Break, Friction Coefficient 0.14, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good