Polyethylene Sheet: 0.75 in Thick, 12 in x 24 in, Opaque, Gray, 4, 000 psi Tensile Strength, No Break
In Stock
$218.75
/each
Earn 218 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 0.75 in Thick, 12 in x 24...
Item 60RW37
$218.75
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2094 |
| Brand | APPROVED VENDOR |
| Material | UHMW Polyethylene |
| Minimum Temperature | -70 Degrees F |
| Rockwell Hardness | 35 HRM |
| Wear Rate | Not Rated |
| Flexural Modulus | 400 MPa |
| Dielectric Strength | 90.6 kV/mm |
| Shore Hardness | 65 Shore D |
| UV-Resistant | Not UV-Resistant |
| Water Absorption | 0.01 % |
| Friction Coefficient | 0.14 |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Static-Resistant | Not Static-Resistant |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Elongation | 280 % |
| Color | Gray |
| Plastic Clarity | Opaque |
| Plastic Thickness | 0.75 in |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Coefficient of Thermal Expansion | Not Rated |
| Tensile Strength | 4,000 psi |
| Backing Type | No Backing |
| Scratch-Resistant | Not Scratch-Resistant |
| Impact Strength | No Break |
| Machinability | 100 % |
| Maximum Temperature | 180 Degrees F |
| Standards | Not Rated |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Plastic Length | 24 in |
| Plastic Width | 12 in |
| Filler Material | Oil |
| Metal Detectable | Not Metal Detectable |
| Mfr. Model # | PS-UHMW-OF-49 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30102515 |
Description
Polyethylene Sheet, UHMW Polyethylene, Grade Oil-Filled, Plastic Length 24 in, Plastic Width 12 in, Plastic Thickness 0.75 in, Gray, Plastic Clarity Opaque, Tensile Strength 4,000 psi, Impact Strength No Break, Friction Coefficient 0.14, Water Absorption 0.01 Percent, Temperature Range -70 Degrees to 180 Degrees F, Plastic Density 0.034 lb/cu in, Plastic Hardness 65D