UHMW Polyethylene Bar: 0.5 in Thick, 0.5 in x 4 ft, Opaque, Gray, 4, 000 psi Tensile Strength
In Stock
$13.99
/each
Earn 13 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.5 in Thick, 0.5 in x...
Item 60RW27
$13.99
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Machinability | 100 % |
| Water Absorption | 0.01 % |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Material | UHMW Polyethylene |
| Minimum Temperature | -70 Degrees F |
| Plastic Length | 4 ft |
| Tensile Strength | 4,000 psi |
| Dielectric Strength | 90.6 kV/mm |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Impact Strength | No Break |
| Scratch-Resistant | Not Scratch-Resistant |
| Metal Detectable | Not Metal Detectable |
| UV-Resistant | Not UV-Resistant |
| Friction Coefficient | 0.14 |
| Static-Resistant | Not Static-Resistant |
| Color | Gray |
| Plastic Clarity | Opaque |
| Standards | Not Rated |
| Rockwell Hardness | 85 HRR |
| Flexural Modulus | 400 MPa |
| Backing Type | No Backing |
| Wear Rate | Not Rated |
| Filler Material | Oil |
| Coefficient of Thermal Expansion | Not Rated |
| Shore Hardness | 65 Shore D |
| Maximum Temperature | 180 Degrees F |
| Plastic Thickness | 0.5 in |
| Plastic Width | 0.5 in |
| Mfr. Model # | PS-UHMW-OF-39 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Oil-Filled, Plastic Length 4 ft, Plastic Width 0.5 in, Plastic Thickness 0.5 in, Gray, Plastic Clarity Opaque, Tensile Strength 4,000 psi, Impact Strength No Break, Friction Coefficient 0.14, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good