UHMW Polyethylene Bar: 0.5 in Thick, 0.5 in x 24 in, Opaque, Gray, 4, 000 psi Tensile Strength
In Stock
$10.56
/each
Earn 10 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.5 in Thick, 0.5 in x...
Item 60RW26
$10.56
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Color | Gray |
| Backing Type | No Backing |
| Wear Rate | Not Rated |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Coefficient of Thermal Expansion | Not Rated |
| Material | UHMW Polyethylene |
| Minimum Temperature | -70 Degrees F |
| Static-Resistant | Not Static-Resistant |
| Filler Material | Oil |
| Machinability | 100 % |
| Shore Hardness | 65 Shore D |
| Plastic Length | 24 in |
| Rockwell Hardness | 85 HRR |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Plastic Thickness | 0.5 in |
| Plastic Width | 0.5 in |
| Scratch-Resistant | Not Scratch-Resistant |
| Flexural Modulus | 400 MPa |
| Dielectric Strength | 90.6 kV/mm |
| Standards | Not Rated |
| Metal Detectable | Not Metal Detectable |
| Impact Strength | No Break |
| Plastic Clarity | Opaque |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Friction Coefficient | 0.14 |
| Water Absorption | 0.01 % |
| UV-Resistant | Not UV-Resistant |
| Tensile Strength | 4,000 psi |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Maximum Temperature | 180 Degrees F |
| Mfr. Model # | PS-UHMW-OF-38 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Oil-Filled, Plastic Length 24 in, Plastic Width 0.5 in, Plastic Thickness 0.5 in, Gray, Plastic Clarity Opaque, Tensile Strength 4,000 psi, Impact Strength No Break, Friction Coefficient 0.14, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good