Polyethylene Sheet: 0.5 in Thick, 12 in x 24 in, Opaque, Gray, 4, 000 psi Tensile Strength, No Break
In Stock
$144.50
/each
Earn 144 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 0.5 in Thick, 12 in x 24...
Item 60RW22
$144.50
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2094 |
| Brand | APPROVED VENDOR |
| Material | UHMW Polyethylene |
| Friction Coefficient | 0.14 |
| Scratch-Resistant | Not Scratch-Resistant |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Elongation | 280 % |
| Color | Gray |
| Minimum Temperature | -70 Degrees F |
| Static-Resistant | Not Static-Resistant |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Dielectric Strength | 90.6 kV/mm |
| Standards | Not Rated |
| Flexural Modulus | 400 MPa |
| Plastic Thickness | 0.5 in |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Machinability | 100 % |
| Metal Detectable | Not Metal Detectable |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Wear Rate | Not Rated |
| Plastic Clarity | Opaque |
| Water Absorption | 0.01 % |
| Maximum Temperature | 180 Degrees F |
| Rockwell Hardness | 35 HRM |
| Plastic Length | 24 in |
| Impact Strength | No Break |
| Tensile Strength | 4,000 psi |
| UV-Resistant | Not UV-Resistant |
| Plastic Width | 12 in |
| Coefficient of Thermal Expansion | Not Rated |
| Backing Type | No Backing |
| Shore Hardness | 65 Shore D |
| Filler Material | Oil |
| Mfr. Model # | PS-UHMW-OF-34 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30102515 |
Description
Polyethylene Sheet, UHMW Polyethylene, Grade Oil-Filled, Plastic Length 24 in, Plastic Width 12 in, Plastic Thickness 0.5 in, Gray, Plastic Clarity Opaque, Tensile Strength 4,000 psi, Impact Strength No Break, Friction Coefficient 0.14, Water Absorption 0.01 Percent, Temperature Range -70 Degrees to 180 Degrees F, Plastic Density 0.034 lb/cu in, Plastic Hardness 65D