UHMW Polyethylene Bar: 0.375 in Thick, 0.5 in x 4 ft, Opaque, Gray, 4, 000 psi Tensile Strength
In Stock
$12.66
/each
Earn 12 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.375 in Thick, 0.5 in...
Item 60RW12
$12.66
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Scratch-Resistant | Not Scratch-Resistant |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Filler Material | Oil |
| Water Absorption | 0.01 % |
| Plastic Clarity | Opaque |
| Plastic Thickness | 0.375 in |
| Maximum Temperature | 180 Degrees F |
| Coefficient of Thermal Expansion | Not Rated |
| UV-Resistant | Not UV-Resistant |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Color | Gray |
| Dielectric Strength | 90.6 kV/mm |
| Impact Strength | No Break |
| Tensile Strength | 4,000 psi |
| Backing Type | No Backing |
| Standards | Not Rated |
| Shore Hardness | 65 Shore D |
| Plastic Length | 4 ft |
| Plastic Width | 0.5 in |
| Flexural Modulus | 400 MPa |
| Static-Resistant | Not Static-Resistant |
| Friction Coefficient | 0.14 |
| Rockwell Hardness | 85 HRR |
| Material | UHMW Polyethylene |
| Machinability | 100 % |
| Minimum Temperature | -70 Degrees F |
| Metal Detectable | Not Metal Detectable |
| Wear Rate | Not Rated |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Mfr. Model # | PS-UHMW-OF-24 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Oil-Filled, Plastic Length 4 ft, Plastic Width 0.5 in, Plastic Thickness 0.375 in, Gray, Plastic Clarity Opaque, Tensile Strength 4,000 psi, Impact Strength No Break, Friction Coefficient 0.14, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good