UHMW Polyethylene Bar: 0.375 in Thick, 0.5 in x 24 in, Opaque, Gray, 4, 000 psi Tensile Strength
In Stock
$7.55
/each
Earn 7 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.375 in Thick, 0.5 in...
Item 60RW11
$7.55
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Wear Rate | Not Rated |
| Standards | Not Rated |
| Plastic Length | 24 in |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| UV-Resistant | Not UV-Resistant |
| Water Absorption | 0.01 % |
| Friction Coefficient | 0.14 |
| Flexural Modulus | 400 MPa |
| Impact Strength | No Break |
| Filler Material | Oil |
| Static-Resistant | Not Static-Resistant |
| Dielectric Strength | 90.6 kV/mm |
| Maximum Temperature | 180 Degrees F |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Rockwell Hardness | 85 HRR |
| Shore Hardness | 65 Shore D |
| Tensile Strength | 4,000 psi |
| Color | Gray |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Metal Detectable | Not Metal Detectable |
| Scratch-Resistant | Not Scratch-Resistant |
| Plastic Thickness | 0.375 in |
| Coefficient of Thermal Expansion | Not Rated |
| Minimum Temperature | -70 Degrees F |
| Machinability | 100 % |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Plastic Width | 0.5 in |
| Backing Type | No Backing |
| Plastic Clarity | Opaque |
| Material | UHMW Polyethylene |
| Mfr. Model # | PS-UHMW-OF-23 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Oil-Filled, Plastic Length 24 in, Plastic Width 0.5 in, Plastic Thickness 0.375 in, Gray, Plastic Clarity Opaque, Tensile Strength 4,000 psi, Impact Strength No Break, Friction Coefficient 0.14, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good