Polyethylene Sheet: 0.375 in Thick, 12 in x 24 in, Opaque, Gray, 4, 000 psi Tensile Strength
In Stock
$112.00
/each
Earn 112 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 0.375 in Thick, 12 in x 2...
Item 60RW07
$112.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2094 |
| Brand | APPROVED VENDOR |
| Dielectric Strength | 90.6 kV/mm |
| Backing Type | No Backing |
| UV-Resistant | Not UV-Resistant |
| Coefficient of Thermal Expansion | Not Rated |
| Scratch-Resistant | Not Scratch-Resistant |
| Standards | Not Rated |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Impact Strength | No Break |
| Plastic Clarity | Opaque |
| Elongation | 280 % |
| Plastic Width | 12 in |
| Machinability | 100 % |
| Maximum Temperature | 180 Degrees F |
| Tensile Strength | 4,000 psi |
| Wear Rate | Not Rated |
| Plastic Length | 24 in |
| Filler Material | Oil |
| Color | Gray |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Friction Coefficient | 0.14 |
| Plastic Thickness | 0.375 in |
| Minimum Temperature | -70 Degrees F |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Flexural Modulus | 400 MPa |
| Material | UHMW Polyethylene |
| Rockwell Hardness | 35 HRM |
| Shore Hardness | 65 Shore D |
| Static-Resistant | Not Static-Resistant |
| Water Absorption | 0.01 % |
| Metal Detectable | Not Metal Detectable |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Mfr. Model # | PS-UHMW-OF-19 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30102515 |
Description
Polyethylene Sheet, UHMW Polyethylene, Grade Oil-Filled, Plastic Length 24 in, Plastic Width 12 in, Plastic Thickness 0.375 in, Gray, Plastic Clarity Opaque, Tensile Strength 4,000 psi, Impact Strength No Break, Friction Coefficient 0.14, Water Absorption 0.01 Percent, Temperature Range -70 Degrees to 180 Degrees F, Plastic Density 0.034 lb/cu in, Plastic Hardness 65D