UHMW Polyethylene Bar: 0.25 in Thick, 1 in x 4 ft, Opaque, Gray, 4, 000 psi Tensile Strength
In Stock
$14.09
/each
Earn 14 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.25 in Thick, 1 in x...
Item 60RV98
$14.09
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Plastic Width | 1 in |
| Metal Detectable | Not Metal Detectable |
| Color | Gray |
| Backing Type | No Backing |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Wear Rate | Not Rated |
| Shore Hardness | 65 Shore D |
| UV-Resistant | Not UV-Resistant |
| Machinability | 100 % |
| Impact Strength | No Break |
| Scratch-Resistant | Not Scratch-Resistant |
| Plastic Clarity | Opaque |
| Rockwell Hardness | 85 HRR |
| Minimum Temperature | -70 Degrees F |
| Dielectric Strength | 90.6 kV/mm |
| Material | UHMW Polyethylene |
| Friction Coefficient | 0.14 |
| Water Absorption | 0.01 % |
| Coefficient of Thermal Expansion | Not Rated |
| Plastic Length | 4 ft |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Filler Material | Oil |
| Flexural Modulus | 400 MPa |
| Standards | Not Rated |
| Plastic Thickness | 0.25 in |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Maximum Temperature | 180 Degrees F |
| Tensile Strength | 4,000 psi |
| Static-Resistant | Not Static-Resistant |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Mfr. Model # | PS-UHMW-OF-11 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Oil-Filled, Plastic Length 4 ft, Plastic Width 1 in, Plastic Thickness 0.25 in, Gray, Plastic Clarity Opaque, Tensile Strength 4,000 psi, Impact Strength No Break, Friction Coefficient 0.14, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good