UHMW Polyethylene Bar: 0.25 in Thick, 0.5 in x 4 ft, Opaque, Gray, 4, 000 psi Tensile Strength
In Stock
$10.53
/each
Earn 10 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.25 in Thick, 0.5 in...
Item 60RV96
$10.53
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Flexural Modulus | 400 MPa |
| Impact Strength | No Break |
| Wear Rate | Not Rated |
| Maximum Temperature | 180 Degrees F |
| Dielectric Strength | 90.6 kV/mm |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Material | UHMW Polyethylene |
| Water Absorption | 0.01 % |
| Standards | Not Rated |
| Tensile Strength | 4,000 psi |
| Plastic Length | 4 ft |
| Shore Hardness | 65 Shore D |
| Machinability | 100 % |
| Plastic Thickness | 0.25 in |
| Rockwell Hardness | 85 HRR |
| Minimum Temperature | -70 Degrees F |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Filler Material | Oil |
| Plastic Width | 0.5 in |
| Friction Coefficient | 0.14 |
| UV-Resistant | Not UV-Resistant |
| Backing Type | No Backing |
| Metal Detectable | Not Metal Detectable |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Static-Resistant | Not Static-Resistant |
| Plastic Clarity | Opaque |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Coefficient of Thermal Expansion | Not Rated |
| Scratch-Resistant | Not Scratch-Resistant |
| Color | Gray |
| Mfr. Model # | PS-UHMW-OF-9 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Oil-Filled, Plastic Length 4 ft, Plastic Width 0.5 in, Plastic Thickness 0.25 in, Gray, Plastic Clarity Opaque, Tensile Strength 4,000 psi, Impact Strength No Break, Friction Coefficient 0.14, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good