UHMW Polyethylene Bar: 0.25 in Thick, 0.5 in x 24 in, Opaque, Gray, 4, 000 psi Tensile Strength
In Stock
$6.74
/each
Earn 6 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.25 in Thick, 0.5 in...
Item 60RV95
$6.74
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Backing Type | No Backing |
| Maximum Temperature | 180 Degrees F |
| Plastic Width | 0.5 in |
| Standards | Not Rated |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Water Absorption | 0.01 % |
| Scratch-Resistant | Not Scratch-Resistant |
| Shore Hardness | 65 Shore D |
| Minimum Temperature | -70 Degrees F |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Coefficient of Thermal Expansion | Not Rated |
| Color | Gray |
| Impact Strength | No Break |
| Wear Rate | Not Rated |
| Rockwell Hardness | 85 HRR |
| Flexural Modulus | 400 MPa |
| Friction Coefficient | 0.14 |
| Metal Detectable | Not Metal Detectable |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Tensile Strength | 4,000 psi |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| UV-Resistant | Not UV-Resistant |
| Plastic Clarity | Opaque |
| Dielectric Strength | 90.6 kV/mm |
| Filler Material | Oil |
| Static-Resistant | Not Static-Resistant |
| Plastic Length | 24 in |
| Plastic Thickness | 0.25 in |
| Machinability | 100 % |
| Material | UHMW Polyethylene |
| Mfr. Model # | PS-UHMW-OF-8 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Oil-Filled, Plastic Length 24 in, Plastic Width 0.5 in, Plastic Thickness 0.25 in, Gray, Plastic Clarity Opaque, Tensile Strength 4,000 psi, Impact Strength No Break, Friction Coefficient 0.14, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good