Polyethylene Sheet: 0.25 in Thick, 12 in x 24 in, Opaque, Gray, 4, 000 psi Tensile Strength, No Break
In Stock
$77.85
/each
Earn 77 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 0.25 in Thick, 12 in x 24...
Item 60RV91
$77.85
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2094 |
| Brand | APPROVED VENDOR |
| Plastic Thickness | 0.25 in |
| Rockwell Hardness | 35 HRM |
| UV-Resistant | Not UV-Resistant |
| Dielectric Strength | 90.6 kV/mm |
| Friction Coefficient | 0.14 |
| Plastic Clarity | Opaque |
| Static-Resistant | Not Static-Resistant |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Scratch-Resistant | Not Scratch-Resistant |
| Tensile Strength | 4,000 psi |
| Maximum Temperature | 180 Degrees F |
| Color | Gray |
| Filler Material | Oil |
| Wear Rate | Not Rated |
| Metal Detectable | Not Metal Detectable |
| Minimum Temperature | -70 Degrees F |
| Elongation | 280 % |
| Water Absorption | 0.01 % |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Material | UHMW Polyethylene |
| Plastic Width | 12 in |
| Machinability | 100 % |
| Backing Type | No Backing |
| Impact Strength | No Break |
| Plastic Length | 24 in |
| Flexural Modulus | 400 MPa |
| Coefficient of Thermal Expansion | Not Rated |
| Standards | Not Rated |
| Shore Hardness | 65 Shore D |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Mfr. Model # | PS-UHMW-OF-4 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30102515 |
Description
Polyethylene Sheet, UHMW Polyethylene, Grade Oil-Filled, Plastic Length 24 in, Plastic Width 12 in, Plastic Thickness 0.25 in, Gray, Plastic Clarity Opaque, Tensile Strength 4,000 psi, Impact Strength No Break, Friction Coefficient 0.14, Water Absorption 0.01 Percent, Temperature Range -70 Degrees to 180 Degrees F, Plastic Density 0.034 lb/cu in, Plastic Hardness 65D