Centrifugal Pump: 1 hp, Single Phase, 115/230V AC, Stainless Steel, 1 1/2 in Inlet Dia., Barbed
In Stock
$860.50
Save 13%
$751.29
/each
Earn 751 points for this item
($7.51 for your next purchase!)
REGISTER NOW TO EARN!
ETA 5-7 BUSINESS DAYS
Request quantity discount pricing
You're Viewing
AMERICAN STAINLESS PUMPS Centrifugal Pump: 1 hp, Single Phase, 115/230...
Mfr # FDP1AL
$751.29
Customers Also Viewed
No related products found.
Product Details
| Brand | AMERICAN STAINLESS PUMPS |
| NPSHr | 23.1 ft |
| Max Ambient Temperature | 104 Degrees F |
| Overall Height | 7.6 in |
| Cord Length | 1 ft |
| Contains California Prop 65 Carcinogen | N |
| Inlet Gender | Male |
| Shaft Seal Type | Mechanical |
| Max Fluid Temperature | 225 Degrees F |
| Thermal Overload Protection | No |
| Impeller Design | Semi-Open |
| Freight Class Code | 39 |
| Motor Efficiency Compliance Certification Number | CC312B |
| Nameplate Voltage | 115/230V AC |
| Phase | Single |
| Discharge Diameter | 1-1/2 in |
| Motor Enclosure Type | TEFC |
| For Use With Potable Systems | Yes |
| Frequency | 60 Hz |
| Inlet Diameter | 1-1/2 in |
| Max Motor Speed | 3,500 RPM |
| Nominal Voltage | 115/230V AC |
| Flow @ 40' Head | 53 gpm |
| Should Sales be Restricted by Region? | N |
| Duty Cycle | Continuous |
| Product Powered by Fossil Fuel | N |
| Standards | UL Listed |
| Volute Material | 304 Stainless Steel |
| Full Load Current | 9.6/4.8 |
| Discharge Rotation Increments | 90 Degrees |
| Flow @ 60' Head | 14 gpm |
| Min Fluid Temperature | -40 Degrees F |
| Best Efficiency Head | 62 ft |
| Series | FDP |
| Display Qty | 1 |
| Priming | Manual |
| Suction Lift - Maximum | 24 ft |
| Discharge Standard | Barbed |
| Ozone Depleting Substance | N |
| Inlet Orientation | Top |
| Manufacturer Part Number | FDP1AL |
| Drive Coupling Type | No Coupling |
| Motor Efficiency Class | Standard Efficient |
| Motor Frame Size | 56J |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Discharge Location | Top Offset |
| Safety Data Sheet (SDS) Applicable? | N |
| Port Connections | Barbed |
| Fluid Temperature Range | -40 Degrees F to 225 Degrees F |
| Number of Stages | 1 |
| Shaft Material | 300 Stainless Steel |
| Pump Housing Material | Stainless Steel |
| NEMA Nominal Efficiency | 74.1 |
| Shut Off Pressure - Maximum | 50 psia |
| Overall Length | 10.8 in |
| Max Specific Gravity | 1 |
| Is this a Hazardous Material Product? | N |
| Overall Width | 6.7 in |
| Wetted Material | Stainless Steel |
| Shaft Seal Material | Carbon/Ceramic, Buna-N |
| California Biodegradable Labeling Compliance | Y |
| Electrical Connection Type | Plug-In |
| Impeller Material | Stainless Steel |
| Discharge Position | Offset |
| For Shaft Outside Diameter | 5/8 in |
| Flow @ 50' Head | 35 gpm |
| Contains California Prop 65 Reproductive Toxicant | N |
| Display Sell UOM | EA |
| Best Efficiency Flow | 37 gpm |
| Motor Design | Capacitor-Start |
| Case Pressure - Maximum | 50 psia |
| Chemical Compatibility | Lactic Acid, Gasoline, Water-Glycol, Boric Acid 10%, Sodium Hydroxide 50%, Benzoic Acid, Sodium Hydroxide 10%, Kerosene, Diethylene Glycol, Potassium Hydroxide 50%, Glycerol, Water, Citric Acid, Detergents, Diesel, Hydraulic Fluid, Antifreeze, Potassium Permanganate 20%, Propylene Glycol, Sodium Hydroxide 20%, Ammonium Hydroxide, Motor Oil, Saltwater, Potassium Hydroxide |
| Pumping Application | Spraying Systems, Condensate Return, Cooling and Heat Transfer, Booster Services, Jockey Pump Services, Evaporative Cooling, Water Circulation, Boiler Feed, Liquid Transfer, Reverse Osmosis and Water Treatment, Filtration, Condensate Removal, Coolant Recirculating |
| Storage Protection Code | A |
| Motor Efficiency Regulation Applicable | N |
| Pump Design | End Suction |
| Flow Rate (Maximum) | 53 gpm |
| Horsepower | 1 hp |
| Mounting Orientation | Horizontal |
| Impeller Diameter | 4-3/8 in |
| Discharge Gender | Male |
| Inlet Position | Offset |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Solid Diameter (Maximum) | 0.27 in |
| Feet of Head (Maximum) | 65 ft |
| Discharge Orientation | Top |
| Inlet Standard | Barbed |
| Intake and Discharge Size | 1-1/2 in , 1-1/2 in |
| Mfr. Model # | FDP1AL |
Description
CentrfPmp, 1 hp, SS, 1-1/2"