UHMW Polyethylene Bar: 0.75 in Thick, 1 in x 12 in, Opaque, Black, 4, 400 psi Tensile Strength
In Stock
$18.02
/each
Earn 18 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.75 in Thick, 1 in x...
Item 60CP26
$18.02
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2097 |
| Brand | APPROVED VENDOR |
| Dielectric Strength | 88 kV/mm |
| Maximum Temperature | 180 Degrees F |
| Coefficient of Thermal Expansion | Not Rated |
| Machinability | 100 % |
| Material | UHMW Polyethylene |
| Static-Resistant | Static-Resistant |
| Wear Rate | Not Rated |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Minimum Temperature | -20 Degrees F |
| Water Absorption | 0.01 % |
| Backing Type | No Backing |
| Plastic Length | 12 in |
| Scratch-Resistant | Not Scratch-Resistant |
| Flexural Modulus | 400 MPa |
| Plastic Clarity | Opaque |
| Friction Coefficient | 0.15 |
| Color | Black |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Metal Detectable | Not Metal Detectable |
| Standards | UL 94 HB |
| Tensile Strength | 4,400 psi |
| Plastic Width | 1 in |
| Shore Hardness | 60 Shore D |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Temperature Range | -20 Degrees F to 180 Degrees F |
| UV-Resistant | Not UV-Resistant |
| Rockwell Hardness | 45 HRM |
| Plastic Thickness | 0.75 in |
| Impact Strength | 16.0 ft-lb/in |
| Mfr. Model # | PS-UHMW-ESD-175 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Antistatic, Plastic Length 12 in, Plastic Width 1 in, Plastic Thickness 0.75 in, Black, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.036 lb/cu in, Corrosion and Chemical Resistance Good