Acrylic Sheet: 0.125 in Thick, 12 in x 12 in, Green, Opaque, 9, 000 psi Tensile Strength
In Stock
$24.35
/each
Earn 24 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Acrylic Sheet: 0.125 in Thick, 12 in x 12 in,...
Item 60AZ95
$24.35
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2095 |
| Brand | APPROVED VENDOR |
| Static-Resistant | Not Static-Resistant |
| Coefficient of Thermal Expansion | 6 x 10^-5 K^-1 |
| Maximum Temperature | 190 Degrees F |
| Flexural Modulus | Not Rated |
| Metal Detectable | Not Metal Detectable |
| Plastic Width | 12 in |
| Plastic Thickness | 0.125 in |
| Temperature Range | 40 Degrees F - 190 Degrees F |
| Fabrication | Cast |
| Impact Strength | 0.3 ft-lb/in |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Machinability | Not Rated |
| Friction Coefficient | 0.8 |
| Scratch-Resistant | Not Scratch-Resistant |
| Dielectric Strength | Not Rated |
| Rockwell Hardness | 95 HRM |
| Color | Green |
| Water Absorption | 0.4 % |
| FDA Compliance | Not FDA Compliant |
| Standards | Not Rated |
| Material | Acrylic |
| Minimum Temperature | 40 Degrees F |
| Tensile Strength | 9,000 psi |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Shore Hardness | 98 Shore D |
| UV-Resistant | UV-Resistant |
| Plastic Clarity | Opaque |
| Plastic Length | 12 in |
| Light Transmission | 7.4 % |
| Water Absorption Rating | Poor (0.26+%) |
| Backing Type | No Backing |
| Wear Rate | Not Rated |
| Mfr. Model # | PS-CACC-34 |
| Country of Origin | Indonesia (subject to change) |
| UNSPSC | 13102005 |
Description
Acrylic Sheet, Acrylic, Grade Standard, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 0.125 in, Green, Plastic Clarity Opaque, Tensile Strength 9,000 psi, Impact Strength 0.3 ft-lb/in, Friction Coefficient 0.8, Water Absorption 0.4 Percent, Temperature Range 40 Degrees to 190 Degrees F, Plastic Density 0.043 lb/cu in, Plastic Hardness Rockwell M95