Submersible Sump Pump: 2/5 hp, 115V AC, 65 gpm Flow Rate @ 10' of Head, 1 1/2 in FNPT
In Stock
$626.50
/each
Earn 626 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
LIBERTY PUMPS Submersible Sump Pump: 2/5 hp, 115V AC, 65 gp...
Item 5YE81
$626.50
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2505 |
| Brand | LIBERTY PUMPS |
| Horsepower | 2/5 hp |
| Duty Cycle | Continuous |
| Shaft Seal Material | Carbon/Ceramic/Nitrile Rubber/Stainless Steel |
| Series | HT40-Series |
| Feet of Head - Maximum | 19 ft |
| Cord Length | 10 ft |
| For Media Type | Clear Water |
| NEC Cord Designation | SJTW |
| Frequency | 60 Hz |
| Manufacturers Warranty Length | 3 yr |
| Current | 13 A |
| Switch Actuation | Tether Float |
| For Industry | Residential |
| Power Source | Corded Electric |
| Switch Electrical Connection | Piggyback |
| Solids Diameter - Maximum | 3/4 in |
| Hazardous Location Class | Not Rated |
| Liquid Temperature - Maximum | 200 Degrees F |
| Sump Pit Diameter - Minimum | 18 in |
| Impeller Design | Vortex |
| Phase | Single |
| Impeller Material | Engineered Polymer |
| Operation | Automatic |
| Discharge | 1-1/2 in FNPT |
| Rated Voltage | 115V AC |
| Motor Housing Material | Cast Iron |
| Gauge/Conductor | 16/3 |
| Flow Rate @ 10 ft of Head | 65 gpm |
| Mfr. Model # | HT41A |
| Country of Origin | USA (subject to change) |
| UNSPSC | 40151512 |
Description
Submersible Sump Pump, HP 4/10, Rated Voltage 115V AC, Amps 12 A, Switch Actuation Tether Float, Switch Electrical Connection Piggyback, Off Point 4 in, On Point 12 in, Body Material Cast Iron, Impeller Material Engineered Polymer, Shaft Seal Material - Pumps Carbon, Ceramic, Nitrile Rubber, Stainless Steel, Flow Rate @ 5 Ft. of Head 59.0 gpm, Flow Rate @ 10 Ft. of Head 50 gpm, Flow Rate @ 15 Ft. of Head 32.0 gpm, Max. Head 20 ft, Min. Sump Pit Dia. 18 in, Body Dia. 9 13/16 in