Booster Pump: 3 hp, Three Phase, 230/460V AC, 16 gpm Best Efficiency Flow, 230 psi Shut Off
In Stock
$3,840.00
/each
Earn 3840 points with this purchase
Request quantity discount pricing
You're Viewing
DAYTON Booster Pump: 3 hp, Three Phase, 230/460V AC,...
Item 5UWL6
$3,840.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2534 |
| Brand | DAYTON |
| Restricted Sale Code | A9 |
| Revolutions per Minute - Maximum | 3,450 RPM |
| Number of Stages | 17 |
| Media Temp. Range | 0 Degrees F to 248 Degrees F |
| California Prop 65 Warning Short Message Compliancy | Y |
| Discharge Type | Flange |
| Impeller Material | Stainless Steel |
| Pump Casing Material | Stainless Steel |
| Best Efficiency Flow | 16 gpm |
| Flow Rate @ 140 psi | 18 gpm |
| Inlet Diameter | 1-1/4 in |
| Compatible Intake Pipe Size | 1-1/4 in |
| Inlet Type | Flange |
| Manufacturer Part Number | 5UWL6 |
| Duty Cycle | Continuous |
| Ozone Depleting Substance | N |
| Should Sales be Restricted by Region? | N |
| Solids Diameter - Maximum | 0.07 in |
| Motor Design | Three-Phase |
| Discharge Standard | Flange |
| Installation | Floor Standing |
| Is this a Hazardous Material Product? | N |
| For Water System Type | Non-Potable Water |
| Motor Ambient Temperature (Maximum) | 104 Degrees F |
| Motor Enclosure | TEFC |
| Phase | Three |
| Inlet | 1-1/4 in Flange |
| Compatible Discharge Pipe Size | 1-1/4 in |
| Media Temperature (Minimum) | 0 Degrees F |
| Product Powered by Fossil Fuel | N |
| Seal Material | EPDM/Silicon Carbide/Stainless Steel |
| Safety Data Sheet (SDS) Applicable? | N |
| Motor Ambient Temperature (Minimum) | 40 Degrees F |
| Low Lead Compliance Level | NC |
| California Prop 65 Cancer | Y |
| Freight Class Code | 39 |
| Flow Rate @ 100 psi | 22 gpm |
| XDELETE - Best Efficiency Pressure | 164 psi |
| Manufacturer Warranty Length | 1 yr |
| For Use With Potable Systems | No |
| Nominal Voltage | 240/480V AC |
| Power Source | Corded Electric |
| Shut Off Pressure - Maximum | 230 psi |
| Flow Rate @ 120 psi | 20 gpm |
| Nameplate Voltage | 230/460V AC |
| Standards | cULus Listed |
| LowLead_WarningMessage | Compliance_LowLead_NotLowLead |
| Flow Rate @ 160 psi | 16 gpm |
| Flow Rate @ 200 psi | 10 gpm |
| Storage Protection Code | A |
| Case Pressure - Maximum | 245 psi |
| Display Sell UOM | EA |
| Motor Frame Designation | 56C |
| Inlet Standard | Flange |
| Discharge Diameter | 1-1/4 in |
| Horsepower | 3 hp |
| Frequency | 60 Hz |
| Overall Length | 9.88 in |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Display Qty | 1 |
| Suction Lift - Maximum | 0 ft |
| California Prop 65 Reproductive Harm | Y |
| Impeller Design | Closed |
| Overall Width | 9 in |
| Full Load Current | 8.4/4.2 A |
| Compliance Certification Number | CC124B |
| Flow Rate @ 180 psi | 13 gpm |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Discharge | 1-1/4 in Flange |
| Prop65_WarningMessage | Compliance_Prop65_Short_CancerandRepro |
| Overall Height | 33.63 in |
| Mounting Orientation | Vertical |
| Media Temperature - Maximum | 248 Degrees F |
| Inlet Gender | Female |
| Mfr. Model # | 5UWL6 |
Description
Booster Pump, 3 hp, 230/460V AC