Magnetic Drive Pump: 1/4 hp HP, Single Phase, 115V AC, Polypropylene, 1 in FNPT
In Stock
$782.50
Save 31%
$543.05
/each
Earn 543 points for this item
($5.43 for your next purchase!)
REGISTER NOW TO EARN!
1 day
Request quantity discount pricing
You're Viewing
FINISH THOMPSON Magnetic Drive Pump: 1/4 hp HP, Single Phase,...
Mfr # DB4P-M613
$543.05
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2530 |
| Brand | FINISH THOMPSON |
| Hazmat_Message | Compliance_Hazmat_ExcGeneral |
| Flow @ 15' Head | 13.5 gpm |
| Motor Frame Size | 63 |
| Pump Mounting Style | Base-Mounted, Foot-Mounted |
| Flow @ 24' Head | 8 gpm |
| Flow @ 3' Head | 18 gpm |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Viscosity (Maximum) | 150 cps |
| Inlet Gender | Female |
| Manufacturers Warranty Length | 5 yr |
| Discharge Diameter | 1/2 in |
| Chemical Compatibility | Acetic Acid 80%, Hydrochloric/Muriatic Acid 20%, Fertilizer, Sulfuric Acid 10% to 70%, Sodium Bisulfate, Ethylene Glycol, Sodium Bisulfite, Deionized Water, Potassium Hydroxide 50%, Sodium Bicarbonate 10%, Herbicide, Acetic Acid 20%, Sodium Hydroxide/Caustic Soda 20%, Water, Citric Acid 50%, Calcium Chloride, Hydrochloric/Muriatic Acid 37%, Sodium Hydroxide/Caustic Soda 50%, Hydrochloric/Muriatic Acid 100%, Sulfuric Acid 1% to 10%, Antifreeze, Ammonium Hydroxide, Saltwater, Fungicide, Sodium Hydroxide/Caustic Soda 80%, Phosphoric Acid 50% |
| Mounting Location | Open Air |
| Full Load Current | 2.4 A |
| Discharge Gender | Male |
| Discharge Standard | NPT |
| Pump Drive Configuration | Close-Coupled |
| Inlet Standard | NPT |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Flow @ 18' Head | 12 gpm |
| Shaft Seal Type | Sealless |
| Port Connections | NPT |
| Contains California Prop 65 Carcinogen | N |
| Overall Length | 12.9 in |
| Safety Data Sheet (SDS) Applicable? | N |
| Best Efficiency Head | 25 ft |
| Horsepower (Maximum) | 1/4 hp |
| Discharge Rotation Increments | 0 Degrees |
| Product Powered by Fossil Fuel | N |
| Suction Port | 1 in NPT |
| Display Sell UOM | EA |
| Fluid Temperature Range | 35 Degrees F to 180 Degrees F |
| Min Fluid Temperature | 35 Degrees F |
| Shut Off Pressure - Maximum | 12.1 psi |
| Drive Coupling Type | Magnetic Coupling |
| Overall Width | 6.2 in |
| Impeller Material | Polypropylene |
| Freight Class Code | 260 |
| Contains California Prop 65 Reproductive Toxicant | N |
| Gasket Material | FKM |
| Ozone Depleting Substance | N |
| Nameplate Voltage | 115V AC |
| Max Ambient Temperature | 180 Degrees F |
| Best Efficiency Flow | 7.5 gpm |
| Inlet | 1 in FNPT |
| Pump Design | End Suction |
| Pumping Application | Chemical Transfer, Liquid Transfer |
| Max Specific Gravity | 1.8 |
| Impeller Diameter | 2-7/10 in |
| Motor Design | Permanent Split Capacitor |
| Motor Enclosure Type | TEFC |
| Discharge | 1/2 in NPT |
| Inlet Type | FNPT |
| Phase | Single |
| Flow @ 6' Head | 18 gpm |
| Is this a Hazardous Material Product? | N |
| Case Pressure - Maximum | 60 psi |
| Overall Height | 6.4 in |
| Flow Rate (Maximum) | 18 gpm |
| Manufacturer Part Number | DB4P-M613 |
| Bearing Type | Radial, Thrust |
| Mounting Orientation | Horizontal |
| Inlet Diameter | 1 in |
| Display Qty | 1 |
| Hazardous Location Class | Not Rated |
| Priming | Manual |
| Feet of Head (Maximum) | 28 ft |
| Max Motor Speed | 3,450 RPM |
| Min Ambient Temperature | 32 Degrees F |
| Number of Stages | 1 |
| Should Sales be Restricted by Region? | N |
| Storage Protection Code | A |
| Housing Material | Polypropylene |
| Max Fluid Temperature | 180 Degrees F |
| Flow @ 9' Head | 16.5 gpm |
| Mfr. Model # | DB4P-M613 |
Description
Magnetic Drive Pump, 1/2in, MNPT, 1/4hp, PP