UHMW Polyethylene Bar: 0.25 in Thick, 1.5 in x 12 in, Opaque, Black, 4, 400 psi Tensile Strength
In Stock
$9.14
/each
Earn 9 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.25 in Thick, 1.5 in...
Item 55UR17
$9.14
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2096 |
| Brand | APPROVED VENDOR |
| Plastic Thickness | 0.25 in |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Minimum Temperature | -70 Degrees F |
| Backing Type | No Backing |
| Tensile Strength | 4,400 psi |
| Dielectric Strength | 45 kV/mm |
| Scratch-Resistant | Not Scratch-Resistant |
| Static-Resistant | Not Static-Resistant |
| Metal Detectable | Not Metal Detectable |
| Standards | FDA, UL 94 HB |
| Water Absorption | 0.01 % |
| Material | UHMW Polyethylene |
| Plastic Length | 12 in |
| Rockwell Hardness | 90 HRR |
| Friction Coefficient | 0.15 |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Plastic Width | 1.5 in |
| Plastic Clarity | Opaque |
| Impact Strength | 16.0 ft-lb/in |
| UV-Resistant | Not UV-Resistant |
| FDA Compliance | FDA Compliant |
| Flexural Modulus | 400 MPa |
| Machinability | 100 % |
| Color | Black |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Maximum Temperature | 180 Degrees F |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Shore Hardness | 70 Shore D |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Wear Rate | Not Rated |
| Mfr. Model # | BULK-PS-UHMWB-286 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Standard, Plastic Length 12 in, Plastic Width 1.5 in, Plastic Thickness 0.25 in, Black, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good