UHMW Polyethylene Bar: 0.125 in Thick, 0.75 in x 12 in, Opaque, Black, 4, 400 psi Tensile Strength
In Stock
$7.17
/each
Earn 7 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.125 in Thick, 0.75 i...
Item 55UP86
$7.17
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Backing Type | No Backing |
| Scratch-Resistant | Not Scratch-Resistant |
| Static-Resistant | Not Static-Resistant |
| Impact Strength | 16.0 ft-lb/in |
| Plastic Thickness | 0.125 in |
| Flexural Modulus | 400 MPa |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Maximum Temperature | 180 Degrees F |
| UV-Resistant | Not UV-Resistant |
| Plastic Length | 12 in |
| Rockwell Hardness | 90 HRR |
| Shore Hardness | 70 Shore D |
| Plastic Width | 0.75 in |
| Color | Black |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Friction Coefficient | 0.15 |
| Metal Detectable | Not Metal Detectable |
| Material | UHMW Polyethylene |
| Tensile Strength | 4,400 psi |
| Machinability | 100 % |
| FDA Compliance | FDA Compliant |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Plastic Clarity | Opaque |
| Wear Rate | Not Rated |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Minimum Temperature | -70 Degrees F |
| Water Absorption | 0.01 % |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Standards | FDA, UL 94 HB |
| Dielectric Strength | 45 kV/mm |
| Mfr. Model # | BULK-PS-UHMWB-238 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Standard, Plastic Length 12 in, Plastic Width 0.75 in, Plastic Thickness 0.125 in, Black, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good