UHMW Polyethylene Bar: 0.125 in Thick, 0.5 in x 12 in, Opaque, Black, 4, 400 psi Tensile Strength
In Stock
$6.85
/each
Earn 6 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.125 in Thick, 0.5 in...
Item 55UP83
$6.85
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Rockwell Hardness | 90 HRR |
| Maximum Temperature | 180 Degrees F |
| Minimum Temperature | -70 Degrees F |
| Plastic Thickness | 0.125 in |
| Material | UHMW Polyethylene |
| Plastic Length | 12 in |
| Friction Coefficient | 0.15 |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Shore Hardness | 70 Shore D |
| Metal Detectable | Not Metal Detectable |
| Tensile Strength | 4,400 psi |
| Machinability | 100 % |
| FDA Compliance | FDA Compliant |
| Scratch-Resistant | Not Scratch-Resistant |
| Impact Strength | 16.0 ft-lb/in |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Flexural Modulus | 400 MPa |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| UV-Resistant | Not UV-Resistant |
| Static-Resistant | Not Static-Resistant |
| Plastic Clarity | Opaque |
| Dielectric Strength | 45 kV/mm |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Water Absorption | 0.01 % |
| Backing Type | No Backing |
| Color | Black |
| Wear Rate | Not Rated |
| Standards | FDA, UL 94 HB |
| Plastic Width | 0.5 in |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Mfr. Model # | BULK-PS-UHMWB-235 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Standard, Plastic Length 12 in, Plastic Width 0.5 in, Plastic Thickness 0.125 in, Black, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good