UHMW Polyethylene Bar: 0.75 in Thick, 1.25 in x 12 in, Opaque, White, 4, 400 psi Tensile Strength
In Stock
$13.90
/each
Earn 13 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.75 in Thick, 1.25 in...
Item 55UP62
$13.90
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Machinability | 100 % |
| Backing Type | No Backing |
| Metal Detectable | Not Metal Detectable |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Minimum Temperature | -70 Degrees F |
| Plastic Width | 1.25 in |
| Friction Coefficient | 0.15 |
| Material | UHMW Polyethylene |
| Maximum Temperature | 180 Degrees F |
| Standards | FDA, UL 94 HB |
| Plastic Clarity | Opaque |
| Water Absorption | 0.01 % |
| Plastic Length | 12 in |
| FDA Compliance | FDA Compliant |
| Shore Hardness | 70 Shore D |
| Flexural Modulus | 400 MPa |
| Impact Strength | 16.0 ft-lb/in |
| Static-Resistant | Not Static-Resistant |
| Plastic Thickness | 0.75 in |
| Tensile Strength | 4,400 psi |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Color | White |
| Scratch-Resistant | Not Scratch-Resistant |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Wear Rate | Not Rated |
| UV-Resistant | Not UV-Resistant |
| Dielectric Strength | 45 kV/mm |
| Rockwell Hardness | 90 HRR |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Mfr. Model # | BULK-PS-UHMW-788 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Standard, Plastic Length 12 in, Plastic Width 1.25 in, Plastic Thickness 0.75 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good